Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Can't I See My CAD Drawing in the NI Motion Assistant? I use the CAD Move in NI Motion Assistant to import a CAD drawing into my script. The file imports properly but I dont see my drawing in either the 2D or the 3D Position View. Why does this happen and how can I fix this? URL: http://digital.ni.com/public.nsf/allkb/7461BD21782BEA3686257413007859C9

虚拟运动板卡和运动助手（Motion Assistant） 当引用MAX中的虚拟板卡时，为何我不能在运动助手中运行一个脚本？ URL: http://digital.ni.com/public.nsf/allkb/08AFC80CBDB691EE4825717E0014795E

Virtual Motion Boards and Motion Assistant Why am I unable to run a script in Motion Assistant when referencing a virtual board in MAX? URL: http://digital.ni.com/public.nsf/allkb/B8C8B4866CD33E7B86256FA50003B933

Motion Assistant 1.2をインストールするとPCI-7344が認識されなくなります NI-Motion 6.1.5をインストールし、PCI-7344を正常に認識しました。Motion Assistant 1.2をインストールするまでは全く問題なく動作していましたが、Motion Assistant 1.2のインストールを行うと、Measurement and Automation Explorer (MAX)にデバイスが表示されなくなりWindowsのデバイ URL: http://digital.ni.com/public.nsf/allkb/76CDAEE55D61269786256F87001C27A5

How Do I Mass Compile the LVCGen\LV71 Directory After Installing LabVIEW 7.1.1? I have one of many National Instruments software programs or hardware drivers installed. A list of relevant drivers would include but not be limited to the current versions of NI-DAQmx, NI-SCOPE, NI-FGEN, NI-DMM, NI-HSDIO, NI SignalExpress, Instrument I/O Assistant, Vision Assistant, Motion URL: http://digital.ni.com/public.nsf/allkb/8AF69867A18D0B3986256F5C0000D23D

Finding an Encoder's Index Value with a Linear Actuator I am using a National Instruments motion controller. I have an encoder attached to the actuator and have wired the Index output of my encoder to my motion control setup. In general, the encoder seems to work just fine; however, when I try to perform a Find Index move, my actuator only moves a very URL: http://digital.ni.com/public.nsf/allkb/088AC20A1DBC287C86256E9300079884