Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Do I Receive Error -200619 When Trying To Acquire Data With Multiple SCXI Modules? I am trying to acquire data with multiple National Instruments Data Acquision cards and multiple SCXI modules in a single chassis.I have connected each card to each module in a parallel configuration but when I try to run my application I get 'Error -200619: Chassis cannot be used for more URL: http://digital.ni.com/public.nsf/allkb/AD469F16D62851168625723A006DEB12

LabVIEW Generates Error -10440 when Using the Easy DIO VIs I have an SC-2345 carrier with eight digital I/O (DIO) modules; in this case, four SCC-DI01 modules and four SCC-DO01 modules. Each SCC module represents a single line of digital input (SCC-DI01) or digital output (SCC-DO01), so my eight modules represent the 8 lines of a single digital port. I URL: http://digital.ni.com/public.nsf/allkb/B045F7ED0BA4095986256A4100635D69

當在使用Easy DIO VI時, LabVIEW產生Error –10440錯誤訊息 我有一個SC-2345上面安裝8個數位I/O(DIO)模組, 在這個情況下, 有個SCC-DI01模組及4個SCC-DO01模組. 每一個SCC模組代表一條數位輸入線(SCC-DI01)或數位輸入線(SCC-DO01), 所以我的8個模組代表一個數位埠的8條線. 我試著去使用Read from Digital Line.vi和Write to Digital Line.vi, 二者預設為■> URL: http://digital.ni.com/public.nsf/allkb/E579F1247106D11D86256DB4000B741B