Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

NI-6703/6704で波形を出力しようとするとエラー-10403が発生します。 NI-6703/6704で、固定の電圧を出力する場合はうまく出力できるのですが、波形やスケール配列を出力しようとするとエラー-10403が発生します。これはどうしてでしょうか？ URL: http://digital.ni.com/public.nsf/allkb/77BCB374ADBD386A8625702D002F2CA4

Various Errors Using Channels 8 and 9 on the AT-AO-10 Channels 8 and 9 on the AT-AO-10 are handled differently than channels 0 through 7, and this difference can result in the following errors when improperly accessed:In the Measurement & Automation Explorer (MAX) test panel, performing sine wave output on channels 8 or 9 results in the error URL: http://digital.ni.com/public.nsf/allkb/13D559256EEE84408625698C0059551F

Why Do I Get Error 10401 when I Try to Use My NI 5401 Arbitrary Function Generator with Virtual Bench-Arb? I am unable to use my NI 5401 Arbitrary Function Generator in Virtual Bench-Arb. Whenever I try to do so, I get Error 10401 --'The specified device is not a National Instruments product, the driver does not support the device (for example, the driver was released before the device was supported), URL: http://digital.ni.com/public.nsf/allkb/77D1289CCCB535B3862569340052D49A

Error -10010 When Using Odd Buffer Sizes With Certain S Series and Analog Output DAQ Devices My data acquisition (DAQ) device returns error -10010 when I specify an odd number of samples to acquire or updates to generate. Why? URL: http://digital.ni.com/public.nsf/allkb/862567530005F09C8625672E001D9C6F

I am getting an incorrect waveform / computer hang, when I run Waveform Generation in the interrupt mode with no onboard FIFO Waveform Generation using Interrupts and no onboard FIFO does not output a nice, continuous sine wave. The waveform generation is also failing if I use my CD-ROM as a CD-Player at the same time as the Waveform output. This does not happen when I use the AT-MIO E-2, which has a FIFO capability. URL: http://digital.ni.com/public.nsf/allkb/4E00A0B1C1BD5F838625625A0074BCD5