Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

NI 6115 EEPROM Update Utility An issue was identified where certain revisions of the PCI and PXI 6115 were built with an incorrect register setting. This issue does not affect applications where analog input is used by itself, but it can affect applications where AI is used in conjunction with analog output, digital URL: http://digital.ni.com/public.nsf/allkb/82DCFAEAF926EB198625741F0061807B

Error -88705 With USB-621x Device After Upgrading to NI-DAQmx 8.7 I just upgraded to NI-DAQmx 8.7. Why am I receiving Error -88705 with my USB-621x device? URL: http://digital.ni.com/public.nsf/allkb/97269DACEB7D13AD86257417006BEE5A

Error 50150 - Reboot USB 9162 after upgrading to DAQmx 8.7 Immediately following an upgrade to DAQmx 8.7 and using a USB-9162, a user may see error 50150 when attempting to use the device until they restart Measurement and Automation Explorer (MAX) or reboot. The Found New Hardware Wizard may also prompt you to reboot. USB-9162 devices should not URL: http://digital.ni.com/public.nsf/allkb/D046874B01378D42862574170072561E

DAQmx Task Gives Error -200077 When Creating a Custom Scale I am trying to create a custom scale for the signals acquired from my USB 6259. I have created an analog input task in Measurement and Automation Explorer, and I have selected custom scale. I am using a map range scale to scale values proportionally from a range of pre-scaled values URL: http://digital.ni.com/public.nsf/allkb/2D94E6E7ED64DC5C862573C20075B217

Errors with USB Devices and NI-DAQmx Base When running a program using NI-DAQmx Base with a USB device, I get an error that I cannot resolve. URL: http://digital.ni.com/public.nsf/allkb/B179266E288CE329862573B40078DDC9

Why Does My Real-Time Controller with NI-RIO and NI-Sync Crash? I have a real-time controller with NI-RIO 2.3 and NI-Sync 2.0.1 installed and the controller will not boot. Why does my controller crash when booting? URL: http://digital.ni.com/public.nsf/allkb/FECB7E15D5025002862573630012F384

Using NI-Scope With Traditional NI-DAQ Devices on Vista Causes System Crash on Hibernation The kernel crashes when coming out of hibernation if I am acquiring data on a PXI-5112 or PXI-5102 running when Windows Vista™ was placed into hibernation. URL: http://digital.ni.com/public.nsf/allkb/F9D9DC2335634C79862572F0005BA040

Why do I get DAQmx Error 50412 for Finite or Continuous Acquisition with my PCI-MIO-16XE-50 Board? I am attempting to test my PCI-MIO-16XE-50 in Measurement and Automation Explorer (MAX) but I keep getting DAQmx Error 50412. I only get this error under Continuous Samples or N Samples acquisition, and not during 1 Sample (On Demand) or 1 Sample (HW Timed). I also see this URL: http://digital.ni.com/public.nsf/allkb/6D87B7A202301AC4862572ED00103FDC

Error -200474 With Digital Frequency Example VIs Modified for Continuous Acquisition I modified the Meas Dig Frequency-Low Freq 1 Ctr example VI to acquire continuously, and unless there is a signal with a frequency greater than 100Hz, I get Error -200474. What is wrong and how can I fix it? URL: http://digital.ni.com/public.nsf/allkb/4E017925BDF2DC2D862572E6007C9594

error 88705 발생원인 및 해결방법 MAX에서 PCI DAQ 보드를 설정하려고 합니다. Device and Interfaces » NI-DAQmx Devices 아래에서 보이긴 하지만 self test나 reset device를 수행하면 "Error 88705"가 발생합니다. URL: http://digital.ni.com/public.nsf/allkb/8968BDED701486B4862573140003A2E0