Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

當在Visual Basic下使用GPIB函式時出現錯誤 Run-Time Error 48 我在灌Windows 2000的電腦下安裝GPIB-USB-A。GPIB-USB-A用來安裝、測試、尋找儀器都很正常。可是當我執行一個簡單的Visual Basic應用程式時，我得到以下的錯誤訊息: Run time error '48': File not found Gpib-32.dll. URL: http://digital.ni.com/public.nsf/allkb/B5650AC47D82411C8625733A004B88DA

PROSet EEPROM Test May Fail with the PCI-8212, PXI-8211, or PXI-8212 When running the Intel PROSet diagnostics on one of these boards, the EEPROM test may fail. Is my EEPROM bad? URL: http://digital.ni.com/public.nsf/allkb/862567530005F09F862569EC004773D2

Reads from GPIB-ENET Causing a Memory Leak In Windows 95, the GPIB and VISA reads from a GPIB-ENET are filling up memory on my computer. My LabVIEW program is working fine until free memory is filled, and then the swapfile (Win386.swp) size increases until it fills the hard drive and crashes the system. What is causing this? URL: http://digital.ni.com/public.nsf/allkb/AAB66FE9C50ED9D9862569260065C904

¿Qué Puede Causar el Error 28 en una GPIB-ENET? Problema: ¿Qué Puede Causar el Error 28 en una GPIB-ENET? Solución: Cuando ocurre un error 28 en la GPIB-ENET, la luz de Ready parpadea siguiendo un patrón de 3 parpadeos largos y 3 cortos. URL: http://digital.ni.com/public.nsf/allkb/862567530005F0A18625699000592817

Causes of EDVR Error on the GPIB-ENET Device What might cause an EDVR error, when I am working with a GPIB-ENET device? URL: http://digital.ni.com/public.nsf/allkb/9D5E9A153A6B45108625669F0043B0A9

Behavior of a Locked GPIB-ENET Box Upon Ethernet Connection Failure A feature of the GPIB-ENET is the ability to lock out other IP addresses (i.e., other computers), so that only one IP address can use the GPIB-ENET until it unlocks the box. What will happen to my locked GPIB-ENET box if the ethernet connection is suddenly lost? URL: http://digital.ni.com/public.nsf/allkb/D22E1D17748DA98E8625659C0062ADDD

Why Do I Get an EDVR Error (0xe10004e) in IBIC When Using the GPIB-ENET? Why do I get an EDVR error (0xe10004e) in the Interactive Control (IBIC) when using the GPIB-ENET with version 1.2 of NI-488.2M Software for Windows 95? The same box works fine with version 1.1 of the driver. URL: http://digital.ni.com/public.nsf/allkb/1A512A5A4A4B16D78525641B006616AF

別のPCからPING（ネットワーク上から認識）することができたGPIB-ENETにアクセスしようとする場合、macOSがハングします。 MacOSのためのGPIBドライバー、バージョン7.1.1およびGPIB-ENETを持っています。Interactive Control (IBIC) あるいはNI-488.2 Testを使用して、GPIB-ENETにアクセスしようとする場合、マックがハングしてしまいます。でも、GPIB-ENETは、別のPCからのPINGに応答します。なぜでしょ URL: http://digital.ni.com/public.nsf/allkb/4EA811AD7858E34086256EC400207099

Assigning an IP Address for a GPIB-ENET on a DEC Alpha Returns a 'cannot find ppaid' Error I have a DEC Alpha with OSF1 version 3.2 on it. When I try to assign an IP address to my GPIB-ENET, I get the following error: Error cannot find ppaid. URL: http://digital.ni.com/public.nsf/allkb/93410A9767DC5EFC852563870062E715

Having Both the GPIB-ENET Driver and the SB-GPIB Driver Loaded Can Cause GPIB Errors I was using a GPIB-ENET box with my workstation, but now I have an SB-GPIB board. I am using version 1.3 of the SB-GPIB driver for Sun. If I call the OpenDev function, it returns a -1 and if I use ibdev, it returns a GPIB error 7 (nonexistent GPIB board) error in LabWindows/CVI URL: http://digital.ni.com/public.nsf/allkb/7A562DB58CFB4EDA8625624D0053E84F