Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Calibration Executive is giving Error -1074001424 When Calibrating a PCMCIA-4050 Why am I receiving error -1074001424 trying to calibrate my PCMCIA-4050 with Calibration Executive? URL: http://digital.ni.com/public.nsf/allkb/4D4E9D5DE63C562D862573BE005D98CC

Error 1074118637 in Calibration Executive when Calibrating a DMM The error below is occuring in Calibration Executive when trying to calibrate a DMM from National Instruments: Error -1074118637 occurred at niDMM Read.vi at step Re-verify ACVoltage Possible reason(s): There is an error in the URL: http://digital.ni.com/public.nsf/allkb/46F62B301745498C8625730200754A14

PXI-4072 Failing Calibration in Calibration Executive 3.2.1 When performing a calibration of a PXI-4072 in Calibration Executive 3.2.1 my calibration always fails. Why does the failure always occur during the Capacitance Verification step? URL: http://digital.ni.com/public.nsf/allkb/5C047112BCD6B10E862572D000441A1F

Error -200152 after running my PXI-4472 through Calibration Executive After performing a calibration through Calibration Executive 3.1.2, my PXI-4472 always returns Error -200152: Data read from the EEPROM on the device is invalid. whenever I try to use the device. This occurs in my application and in MAX through Test Panels. Why URL: http://digital.ni.com/public.nsf/allkb/CD5822581645D90C862572BC005EA7B2

Error -17208 When Using SCXI-1104 with Calibration Executive 3.2 Error -17208 is returned when calibrating an SCXI-1104 with Calibration Executive 3.2. URL: http://digital.ni.com/public.nsf/allkb/2FC4059D33FEF318862572BB0043704C

Error -200077 When Using an NI 9263 with Calibration Executive 3.2 When I attempt to calibrate an NI 9263 (cRIO/cDAQ module) with Calibration Executive 3.2, I'm presented with error -200077. URL: http://digital.ni.com/public.nsf/allkb/F979EC662795C43C862572B80081D469

Why Do My [c]FP-TC-120 Modules Keep Failing Calibration? I am using Calibration Executive to check the calibration of my [c]FP-TC-120 modules. Every time I run the test, all of my thermocouple modules fail the negative tolerance test. I found this suspicious, so I looked into the specifications. For the 20mV test, the pass/fail limit is +/-10uV but URL: http://digital.ni.com/public.nsf/allkb/2E444F0A014D4B95862572A30068CC27

Error -17208 when Calibrating an SCXI-1104 with Calibration Executive 3.2 Why do I receive error '-17208, File or directory not found' when I try to calibrate my SCXI-1104 with Calibration Executive 3.2? URL: http://digital.ni.com/public.nsf/allkb/D550648B1D6C563886257288005490AF

Calibration Executive Error -17313 I just installed Calibration Executive 3.1; why do I get error -17313 whenever I try to run a calibration procedure? URL: http://digital.ni.com/public.nsf/allkb/9FA8469DB891721B8625724000823F77

Error 1074135039 With Calibration Executive and PXI-4060 I am using Calibration Executive 3.1 to calibrate my PXI-4060. My calibrator is the Fluke 5700A. When the procedure reaches the 'AC Volts Verification' step, it gives error 1074135039. At this time, the 5700A displays a value of 237.5 V DC on its screen. What is the problem? URL: http://digital.ni.com/public.nsf/allkb/CD73E8828F726C788625720B0050964D