Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

The C Command 'Interrupt' Does Not Works In My PIC Program I am using the Multisim MCU Module and I have written my C code for a PIC that uses interrupts as specified by the HI-TECH PIC C User Manual. But my code is not executing as expected. Everything works fine once I stop using the interrupt command. URL: http://digital.ni.com/public.nsf/allkb/BB362FC84700D646862574270053D1B1

Multisim or Ultiboard Leaking GDI Resource Handles Opening multiple files increases the number of GDI resource handles, eventually leading to a crash. URL: http://digital.ni.com/public.nsf/allkb/E7EC0475F3B2022F8625741A006B4879

User Database Cannot Be Read in Multisim or Ultiboard When I open Multisim or Ultiboard I receive the following warning: Not a valid password. The User Database cannot be read. Features using the User Database will not work. For some reason I have no access to the User Database configured URL: http://digital.ni.com/public.nsf/allkb/224F3870A446E94386257411003A7BCD

Multiple LabVIEW Run-Time Engine 8.2 Entries in the TestStand Deployment Utility I am building a TestStand deployment and when I select which drivers and components to add to the installer, there are two entries for NI LabVIEW Run-Time Engine 8.2 in the list of components to include. If I build a deployment that includes the LabVIEW Run-Time Engine as well as LabVIEW DSC URL: http://digital.ni.com/public.nsf/allkb/724EFF4ADD28B2E68625740B0077D24D

Multisimでシミュレーションを実行すると”Error: C:\DOCU….”というエラーを解消するにはどうすればいいでしょうか？ Multisimでシミュレーションを実行すると”Error: C:\DOCU….”というエラーを解消するにはどうすればいいでしょうか？ URL: http://digital.ni.com/public.nsf/allkb/03F3CF1DF5979A9986257314000D8EFD

Error Updating NI Circuit Design Suite 10.0 through SUU on Japanese Windows OS I am trying to upgrade my Multisim version 10 on my Japanese operating system but Support and Upgrade Utility (SUU) displays the message: An error occurred while executing patches: A patch failed to install or was cancelled manually. URL: http://digital.ni.com/public.nsf/allkb/BA68975D8D06BD87862572FE005CD896

Multisim 9 or Ultiboard 9 installer gives error: 'Object Reference Not Set'. I am installing Multisim 9 or Ultiboard 9 and the installer crashes with the following error message (see picture attached): ------------------------------------------------------------- Error Number: 0x80040706 Description: Object Reference Not Set Setup will now URL: http://digital.ni.com/public.nsf/allkb/2394F911602EF9CC862572300056BAD5

Multisim 9 또는 Ultiboard 9 인스톨러가 다음과 같은 에러를 발생합니다.: 'Object Reference Not Set'. Multisim 9 또는 Ultiboard 9 을 설치하는데 인스톨러가 다음과 같은 에러 메세지를 발생하며 충돌이 납니다.(아래 첨부된 그림참조): ------------------------------------------------------------- Error Number: 0x80040706 Description: Object Reference Not Set Setup will now terminate -- URL: http://digital.ni.com/public.nsf/allkb/BF63B2755CB147B586257236002D3F98

I get error: 'Error during Autorouter Preprocessing Padstack cannot be used as a Via' in Ultiboard. In Ultiboard when I start the autorouter I get error message: 'Error during Autorouter Preprocessing Padstack cannot be used as a Via'. URL: http://digital.ni.com/public.nsf/allkb/00BCAFDCE57CD14A8625722800540E8F

Error -5009: 0x8002802b When Installing Multisim or Ultiboard I was starting the software installation from the CD and suddenly the installer crashed with a Windows® dialog box saying: An error (-5009 : 0x8002802b) has occurred while running the setup. How can I fix this? URL: http://digital.ni.com/public.nsf/allkb/D62FB6B1D1DC93C38625721900775C5C