Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Linker Error on Multiple Builds in a LabVIEW Blackfin Project I am getting a linker error on the third or fourth build in a LabVIEW Blackfin Project. What do I do? URL: http://digital.ni.com/public.nsf/allkb/BCD5FC03F3461947862573D80071A7D1

Why Do I Get A Resource Interface(s) Used in Multiple Clock Domains Error? I am compiling an FPGA VI for my CompactRIO system. I am using two digital I/O modules with one digital module being used in a timed loop using a derived clock, and the other module being used in a parallel while loop. When I try to compile I receive an error similar to the following: URL: http://digital.ni.com/public.nsf/allkb/0A933B88B50046B0862573D30007333E

Issues with the Control Design Instance of the Discrete Transfer Function (SISO) Why do I get incorrect results when I use the Control Design Transfer Function as an input to the SISO instance of the Discrete Transfer Function? When I use the Simulation Transfer Function as an input, everything seems to work fine. Also, when I use an array as an input instead of a single URL: http://digital.ni.com/public.nsf/allkb/86E964554A82B98B862573D000667F6D

Why Do I Have a Broken Wire When Passing My FPGA VI Reference Into a SubVI? When passing an FPGA VI Reference wire into a subVI, the wire that was once solid is now broken. The error message states that I have connected two clusters of different elements. How do I fix this? URL: http://digital.ni.com/public.nsf/allkb/7E0D73FF59368E5A862573B600692E52

How Do I Fix a *.c Error When I Try to Run an EXE on My TPC-2006? Every time I try to run a LabVIEW EXE on my TPC-2006 I get the following error: Pocket PC *.c is a missing VI or c file. LVforms.h is a missing VI or c file I have even tried running shipping examples but I constantly get this URL: http://digital.ni.com/public.nsf/allkb/5E9796BD30A6C644862573860071EBE0

ホストからFPGAにDMA転送する時にエラー-63001が発生します。 cRIOのホスト（RT）側からcRIOのFPGA側へのデータ転送にDMA転送を行おうと考えています。そのため、LabVIEWのプロジェクトエクスプローラのFPGAターゲットでFIFOを作成し、プロパティでTypeの項目をHost to Target - DMAに設定し、FIFOを作成■> URL: http://digital.ni.com/public.nsf/allkb/148D9EDAF7A3BE3E862573850043C395

Error -1013 on a Real-Time Target Why Do I Receive Error -1013 When I Attempt to Use a Front Panel Property Node on a Real-Time Target? URL: http://digital.ni.com/public.nsf/allkb/060FC36D431EFCB98625737D007C51C1

Failed to Retrieve Breakpoint Info Error with LabVIEW Embedded for Blackfin I am trying to debug my application that is going to run on my Blackfin EZ-KIT. When I try to debug I get an error saying Failed to retrieve breakpoint info Details: Object not found (invalid ID) as shown in the picture below. How do I fix this error? URL: http://digital.ni.com/public.nsf/allkb/57137C07BF982F8D86257371007B0D94

NI SoftMotion Development Module Shipping Example 'Servo Position Loop' exhibits jerky movement Why does the 'Servo Position Loop' shipping example of the NI SoftMotion Development Module (SMDM) 2.1 and lower exhibit jerky motion? URL: http://digital.ni.com/public.nsf/allkb/F0378458BE6A52BF86257369004E8F89

Why Does My Real-Time Controller with NI-RIO and NI-Sync Crash? I have a real-time controller with NI-RIO 2.3 and NI-Sync 2.0.1 installed and the controller will not boot. Why does my controller crash when booting? URL: http://digital.ni.com/public.nsf/allkb/FECB7E15D5025002862573630012F384