Error -200400 Using HSDIO WriteNamedWaveformWDT Function
I am using CVI 8.0 and trying to write a waveform of 12177 samples to a high speed digital input/output (HSDIO) card. Why am I receiving an error -200400 when I use the niHSDIO_WriteNamedWaveformWDT function?
URL: http://digital.ni.com/public.nsf/allkb/B5B8799A923484F38625713A00663F29
|
.NET Controller Wizard Returns Global Assembly Cache Error
I am using LabWindows/CVI 8.0 and are trying to use the .NET Controller Wizard. However, when I select Tools » Create .NET Controller, I receive the error: 'Could not get assemblies from Global Assembly Cache' What's going on and how can I fix these errors?
URL: http://digital.ni.com/public.nsf/allkb/72A04A7C3A652C78862571150019F8ED
|
LabWindows/CVI Timer Functions Run Improperly on AMD Athlon 64 X2 Systems
My timer functions run improperly on PCs with AMD-Athlon 64 X2 Processors, but seem to work on other systems. Why am I seeing this behavior?
URL: http://digital.ni.com/public.nsf/allkb/8482E9527AAECB8A8625711400550B0D
|
Linker Errors When Using LabWindows/CVI Static Libraries and Object Files in Microsoft Visual Studio 2005
When I try to use a LabWindows/CVI-generated .obj or .lib file in Microsoft Visual C 2005, without using the LabWindows/CVI Conversion Wizard, I get an error that says the linker could not find libc.lib. This did not happen with previous versions of Visual Studio. How do I fix this
URL: http://digital.ni.com/public.nsf/allkb/302C53649D34035886257114007C1C56
|
Receiving Procedure Entry Point Error in CVIRTE.dll with LabWindows/CVI
I have developed a LabWindows/CVI application that runs fine on my development computer. However, when I attempt to run my application on a target computer, I receive several errors saying: The procedure entry point [...] could not be located
URL: http://digital.ni.com/public.nsf/allkb/1DB3814D6F552100862570EB00777C1D
|
Unable to Load LSB file into Code Interface Node (CIN)
I have created a LSB file, which I am trying to load into my Code Interface Node ( CIN ) in LabVIEW. I do not receive an error message when loading the LSB, but when I try executing my VI, I receive the error 'Code Interface Node: object code is not loaded.' How can I properly load my LSB file?
URL: http://digital.ni.com/public.nsf/allkb/4710B0C8C47F5B93862570E700745417
|
.NET Framework Error Message When Using the .NET Controller Wizard in LabWindows/CVI
When I select Tools » Create .NET Controller, I receive the following error message: 'Could not load required CVI .NET modules. Install .NET Framework version 1.1 or higher and repair the CVI and CVI Runtime Engine installers to install the CVI .NET
URL: http://digital.ni.com/public.nsf/allkb/71593D05E9A2B787862570D1006D012A
|
EasyTab Parent Panels Do Not Receive Focus Events
In LabWindows/CVI, when I create an EasyTab control on a panel, I do not receive focus events when I click on the parent panel. How can I correct this behavior?
URL: http://digital.ni.com/public.nsf/allkb/CD7667C0DA0DF8E9862570B300733E10
|
Why do I Get a 'Baseline File Not Found' Error in setup.ini When Running an Installer I Created?
When I run the installer I built using LabVIEW 8.0 or LabWindows/CVI 8.0 I receive an error from setup.exe stating that errors were found in my setup.ini file. The error in the setup.ini is that a file cannot be found, such as DAQBaseline, GPIBBaseline, IMAQBaseline, etc. How can I fix the
URL: http://digital.ni.com/public.nsf/allkb/832F0661156D8EA4862570A0007936BD
|
Compile Errors When Running NI-DAQmx Examples From LabWindows/CVI 6.0
Why do I get compile errors in LabWindows/CVI 6.0 when I compile the NI-DAQmx shipping examples for ANSI C?
URL: http://digital.ni.com/public.nsf/allkb/AAECBA75E4490CD18625709D00529803
|
