Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

NI 9219 Convert FXP to Thermocouple VI I am using NI-RIO 2.4 with fixed point I/O and an NI 9219 in a CompactRIO. How can I convert the FXP channel value in the real-time controller or host PC to temperature units, accounting for the CJC value? URL: http://digital.ni.com/public.nsf/allkb/22C1D4F68DD27B6286257434005EA8F7

Letter of Volatility for C-Series Modules I need official confirmation that sensitive data passing through National Instruments C-Series modules will be erased when the device loses power. URL: http://digital.ni.com/public.nsf/allkb/7A0C5C240BE55B0F862574120001838E

Letter of Volatility for the CompactDAQ 9172 I need official confirmation that sensitive data passing through National Instruments CompactDAQ-9172 chassis will be erased when the device loses power. URL: http://digital.ni.com/public.nsf/allkb/1BDCFC7B8C53FCFC86257411005D02C8

Current vs. Voltage Characteristics for C-Series Modules with Current Limiting Architectures What input impedance should I expect when using a C-Series module with a current limiting architecture (9421, 9422 and 9423)? URL: http://digital.ni.com/public.nsf/allkb/7C8EE3C395478645862573FC00783B08

How Do I Acquire Data from More than One CompactDAQ Module in LabVIEW SignalExpress? I need to acquire data from multiple modules in my cDAQ-9172 chassis using LabVIEW SignalExpress. How do I do accomplish this? URL: http://digital.ni.com/public.nsf/allkb/7F890A8413C0544A862573F4006D4E63

Error -200016 with NI USB-9263 I am running my NI USB-9263 at the maximum rate on all channels with the regeneration mode set to Do Not Allow Regeneration and writing less than 5000 points per write. I receive the error message URL: http://digital.ni.com/public.nsf/allkb/7DEB112180E3DA0E862573F3006A6DF7

Determining the Maximum Current Output for the NI 9263 Module I want to ouput more than 1 mA of current with my NI 9263 cDAQ module. Can I output more than 1 mA of current if so, what is the maximum current output for the NI 9263 module? URL: http://digital.ni.com/public.nsf/allkb/52A4C4851F148B42862573E800700DE0

Does the CompactRIO 9215 Module Have Anti-Alias Filters? We recently purchased several cRIO NI 9215 modules together with a cRIO NI 9233 module. I was looking for information on the anti-alias filters and I found that the 9215 does not have anti-alias filter and the 9233 does. Why does the cRIO-9215 module not have anti-alias filters? Which URL: http://digital.ni.com/public.nsf/allkb/2C4C52B37819F838862573E20055F037

How do I configure the Input Range of the NI 9237? The NI 9237 has an input range of 25 mV for every volt of excitation. Since this device can provide a maximum excitation voltage of 10 volts, I expect that a maximum input range of 250 mV. If I configure a task with an input range of more than 25 mV, I get error -200077: "Requested value is URL: http://digital.ni.com/public.nsf/allkb/8869E00B851A868E862573D80066A1FB

Different Types of Isolation: Channel-to-Channel, Bank (Channel-to-Bus), and Channel-to-Earth Ground Isolation What are the differences between the types of electrical isolation NI offers on devices? I do not understand the differences between channel-to-channel, bank (channel-to-bus), and channel-to-earth ground isolation. URL: http://digital.ni.com/public.nsf/allkb/CF71091043A6193B862573D70077138B