Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

PXI-8108 Ferrite Installation for USB Devices Note To Users The attached guide describes how to install a simple, snap-on noise-suppression device, called a ferrite, onto your USB interface cables to attain a desired level of electromagnetic compatibility (EMC). URL: http://digital.ni.com/public.nsf/allkb/65E6736F94E0C20786257487006DB435

What Operating System is my Real-Time Controller Running and Why? What Operating System is my Real-Time Controller Running and more importantly why are there different Real Time Operating Systems on different Hardware Targets? URL: http://digital.ni.com/public.nsf/allkb/D85F9139AEB88F188625745700569E8D

What is the maximum serial baud rate for embedded PXI controllers? What is the maximum baud rate for the built in RS-232 port on my embedded PXI controller? URL: http://digital.ni.com/public.nsf/allkb/01E1586616FD650886257440006E44EB

Current Output for PXI-8196 and PXI-8186 USB Ports What is the current output on the USB ports on the PXI-8186 / PXI-8196 controller? Also is this independent or shared current on the USB bus? URL: http://digital.ni.com/public.nsf/allkb/78A309AB80B791F886257434003DD593

Why Can't I Boot My Real-Time Controller From a USB Key? I am trying to boot my desktop PC or PXI controller from a real-time (RT) USB utility drive that I created in Measurement and Automation Explorer. I set the controller to boot from USB by changing the boot order in the BIOS, but it is still not working. Why is my controller not detecting the URL: http://digital.ni.com/public.nsf/allkb/9F71984BF5D7DCF68625742E0072797E

What is the Correct File Path Format for LabVIEW Real-Time Targets? I am trying to save a file on my real-time target and need to know what directory to specify for saving the file. What directory do I save the file on to make sure it is saved on the real-time target? URL: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF

Can I Make My PXIe-8130 Into a Dual-Boot Controller? I would like to set up my PXIe-8130 controller so that it can boot into Windows and LabVIEW Real-Time. Is this possible? URL: http://digital.ni.com/public.nsf/allkb/BB744858794373CA8625741A00786FC5

How do I install Reliance on my RT PC or PXI Target? Reliance is a file system developed specifically for embedded systems. It is used in real-time systems where there cannot be a chance that data could be lost due to file system corruption. In order for Reliance to be used, support for Reliance must be offered by the Real-Time Operating URL: http://digital.ni.com/public.nsf/allkb/8289ED02D027784A86257413005B5F69

My PXI Express Controller Will Not Shut Down I have a PXI Express Controller that will not shutdown. Every time I shutdown the controller from Windows it reboots never allowing me to turn off the power to the system. URL: http://digital.ni.com/public.nsf/allkb/8089BEADD05649098625740B00761FC8

MAX Crashes after Rebooting a RT PXI-8104 with Several Devices that Support TEDS Measurement and Automation Explorer (MAX) crashes when rebooting a connected Real-Time (RT) controller that has TEDs devices installed. URL: http://digital.ni.com/public.nsf/allkb/97BAAADF2481903B862573F300786DD0