Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Can I Use One SCXI Module in Multiple LabVIEW Applications at the Same Time? Can I use one SCXI module in multiple LabVIEW applications that will run simultaneously? Each application is specific to a certain test setup, but each test setup uses different channels on an SCXI card using one DAQ card. URL: http://digital.ni.com/public.nsf/allkb/55FDCBF1CA929B268625726E007EA229

SCXI Modules Not Selected Automatically In PXI-SCXI Combo Chassis None of my SCXI modules are selected automatically in my combo chassis, even though the chassis is turned on and connected properly. If I select the module manually, none of the modules work. How can I solve this problem? URL: http://digital.ni.com/public.nsf/allkb/C56F7D3E11C546208625726100672CA2

NI Switches and AC Wall Power Compatability Which NI Switches can be used to switch AC wall power? I tried using the SCXI 1166 to switch wall power, but it didn't operate as expected. URL: http://digital.ni.com/public.nsf/allkb/855AF9CBDAACE3018625725A00638653

How Much Current Does The SCXI-1000DC Chassis Draw? What is the average current that the SCXI-1000DC Chassis draws? What about the current drawn when the SCXI-1600 and SCXI-1129 modules are inserted as well? URL: http://digital.ni.com/public.nsf/allkb/E08E7BDD7DBBB7E48625723B00036702

Why Do I Receive Error -200619 When Trying To Acquire Data With Multiple SCXI Modules? I am trying to acquire data with multiple National Instruments Data Acquision cards and multiple SCXI modules in a single chassis.I have connected each card to each module in a parallel configuration but when I try to run my application I get 'Error -200619: Chassis cannot be used for more URL: http://digital.ni.com/public.nsf/allkb/AD469F16D62851168625723A006DEB12

SCXI Quick Start Guide Reference I am looking for cable assemblies, terminal blocks and other accessories for my SCXI system. Where can I find this information? URL: http://digital.ni.com/public.nsf/allkb/8293C97CAC86374886257212005F159C

Testing Your SCXI-1200 System If you want to use the parallel port (LPT port) to control your SCXI system, then you must have SCXI-1200 as the first module in your chassis. The parallel port cable plugs directly from the back of SCXI-1200 to the LPT port of your computer. URL: http://digital.ni.com/public.nsf/allkb/A028CCEB84E3ECA986257212007BE794

Troubleshooting SCXI-1200 Configuration Problems My SCXI-1200 fails the resource test in MAX or my SCXI chassis fails to verify. URL: http://digital.ni.com/public.nsf/allkb/C88F52F070153C1B86257212004C9F0E

Voltage Signals Merging Together Problem: Why are my voltage signals merged together when using the SCXI-1100? Solution: The reason why the signals are merging together is because the filter setting on the module is too high. The filter setting can be changed by switching a jumper on the module. URL: http://digital.ni.com/public.nsf/allkb/5252B01D780CB0E786257206000DBE86

How do I Transfer Tasks, Virtual Channels, and Custom Scales to Another Computer? I have created several tasks, virtual channels, and custom scales that are specific to a LabVIEW program that I would like to move to another computer. How can I easily transfer these things to the new computer? URL: http://digital.ni.com/public.nsf/allkb/42A2D212796B3DC2862571FF0061B402