Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

The USB-1359 and Windows Vista 64 When I plug a USB-1359 into my Windows Vista 64 machine, a message pops up asking for the device's drivers. The operating system recognizes the device by name and asks for driver software for the NI-USB 1359. Can I use this device even though the readme does not list support for Vista URL: http://digital.ni.com/public.nsf/allkb/551569CAEE3A34488625729C00760E52

Which Strain Gauge Modules Support Custom Shunt Calibration Values? National Instruments' strain gauge module 1521x has a Shunt Resistance of 100kΩ, is there anyway of changing this value? URL: http://digital.ni.com/public.nsf/allkb/6B1B3E8A2A484351862572900035F807

Multichannel SCXI Convert Clock Default Rate Change in NI-DAQmx 8.5 How does NI-DAQmx choose the convert clock rate for a multichannel SCXI acquisition? URL: http://digital.ni.com/public.nsf/allkb/1BF39CC271CA7A9D8625728E0061EF95

Where Can I Find The Warranty For My NI Hardware? I'm trying to find the warranty information for my NI hardware. Where can I find it? URL: http://digital.ni.com/public.nsf/allkb/8341879DC763DF5886257289005D816E

Thermocouple Accuracy Table by Type and Temperature I am reading the temperature of a chamber using two thermocouple of the same type but the readings are different. I have calculated the accuracy of my measurement hardware but it does not compensate for the difference in readings. What may be causing this phenomenon? URL: http://digital.ni.com/public.nsf/allkb/776AB03E065228408625727B00034E20

Error-200576 with SCXI-1102 and SCXI-1308 In Measurement and Automation Explorer (MAX), I am getting Error-200576 when I select Built-in as the CJC source in my temperature task. I am using SCXI-1102 module with SCXI-1308 as the terminal block. Why am I receiving this error? URL: http://digital.ni.com/public.nsf/allkb/6CF94E0346BF27AD862572790061172D

Why Do I Get Error -200077 When Trying to Configure My SCXI-1120/D? I have a SCXI-1120/D connected to an M-Series card. When I try to acquire data in a Measurement & Automation Explorer (MAX) Test Panel, I receive the following error: Error -200077 occurred at Test Panel Possible Reason(s): Requested value is not a supported URL: http://digital.ni.com/public.nsf/allkb/1EC380B82065EAC0862572730075415D

Can I Use One SCXI Module in Multiple LabVIEW Applications at the Same Time? Can I use one SCXI module in multiple LabVIEW applications that will run simultaneously? Each application is specific to a certain test setup, but each test setup uses different channels on an SCXI card using one DAQ card. URL: http://digital.ni.com/public.nsf/allkb/55FDCBF1CA929B268625726E007EA229

SCXI Modules Not Selected Automatically In PXI-SCXI Combo Chassis None of my SCXI modules are selected automatically in my combo chassis, even though the chassis is turned on and connected properly. If I select the module manually, none of the modules work. How can I solve this problem? URL: http://digital.ni.com/public.nsf/allkb/C56F7D3E11C546208625726100672CA2

NI Switches and AC Wall Power Compatability Which NI Switches can be used to switch AC wall power? I tried using the SCXI 1166 to switch wall power, but it didn't operate as expected. URL: http://digital.ni.com/public.nsf/allkb/855AF9CBDAACE3018625725A00638653