Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

What is the Frequency Response for the SCXI-1102? The manual for the SCXI-1102 lists that the lowpass filter is a two-pole filter with a 2 Hz cutoff frequency to reject 60 Hz noise. What family of filter is this? URL: http://digital.ni.com/public.nsf/allkb/3CFA60E20AC9C72586257341007F3AD4

What is the Frequency Response for the SCXI-1102B? The manual for the SCXI-1102B lists that the lowpass filter in the device is a 3 pole filter with a 200 Hz cutoff frequency. What family of filter is this? URL: http://digital.ni.com/public.nsf/allkb/A21EAC7B480EED958625732C00816637

Programmatically Obtaining Serial Number from SCXI-1127 and SCXI-1128 Modules I am using the DAQmx Device » DevSerialNum property node in LabVIEW, and returning a value of '0' for the SCXI-1127 and SCXI-1128 devices in my system. All of my other SCXI modules return proper serial numbers. Why do I recieve a '0' instead of a serial number for these two modules? URL: http://digital.ni.com/public.nsf/allkb/8B1C5C1F5EEF15AA862572C700574A50

Why Can't I Simulate my DAQ Device in Measurement & Automation Explorer? My device is supported in NI-DAQmx and I have NI-DAQmx installed. I would like to simulate my National Instruments DAQ device in Measurement & Automation Explorer (MAX). When I navigate in the MAX Configuration tree to My System » Data Neighborhood » Devices and URL: http://digital.ni.com/public.nsf/allkb/4B20AD64F650D2D5862572C2005779A7

Error -17208 When Using SCXI-1104 with Calibration Executive 3.2 Error -17208 is returned when calibrating an SCXI-1104 with Calibration Executive 3.2. URL: http://digital.ni.com/public.nsf/allkb/2FC4059D33FEF318862572BB0043704C

Why Isn't My SCXI-1163 Detected in MAX? I have a SCXI-1163 in my SCXI chassis, but when I click the Auto-Detect All Modules button in my SCXI Chassis Configuration dialog box, MAX does not find my SCXI-1163. URL: http://digital.ni.com/public.nsf/allkb/919B8C262E74A861862572B50049CF24

Cannot Access Signals such as Analog Output Through SCXI Backplane Communication in a PXI/SCXI Combination Chassis I am using a PXI-1050 combination chassis with a supported MIO card in the right-most slot of the PXI system. I am trying to access the analog output signals from the MIO board by using an SCXI-1180 to read the signals through the SCXI backplane, but I am unable to get any readings from URL: http://digital.ni.com/public.nsf/allkb/2E4B88FDAD56DDD3492572AC0078E845

Can I Use the 9944 and 9945 Bridge Completion Accessories With the SCXI-1314T? I have a 9944 or 9945 bridge completion accessory and would like to use it with my SCXI-1314T TEDS Terminal Block. URL: http://digital.ni.com/public.nsf/allkb/925F415C8BCE5B5F8625729C00736AB8

The USB-1359 and Windows Vista 64 When I plug a USB-1359 into my Windows Vista 64 machine, a message pops up asking for the device's drivers. The operating system recognizes the device by name and asks for driver software for the NI-USB 1359. Can I use this device even though the readme does not list support for Vista URL: http://digital.ni.com/public.nsf/allkb/551569CAEE3A34488625729C00760E52

Which Strain Gauge Modules Support Custom Shunt Calibration Values? National Instruments' strain gauge module 1521x has a Shunt Resistance of 100kΩ, is there anyway of changing this value? URL: http://digital.ni.com/public.nsf/allkb/6B1B3E8A2A484351862572900035F807