Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Am I Getting Noisy Measurements with My SC-2345 Signal Conditioning Modules? I have an SC-2345 box with one or more signal conditioning modules. I am able to read from the modules, but I get inconsistent or noisy readings. Shouldn't the signal conditioning take care of the noise for me? URL: http://digital.ni.com/public.nsf/allkb/4F00A0167643CC2F86256F39004EDD06

Interval Scanning, Simultaneous Sampling, and Round-Robin Scanning Support I am developing an application using some of your data acquisition boards on which I am acquiring from multiple channels. It is very important for me to know exactly how the different channels are getting sampled. Are they scanned one after another or are they sampled at exactly the same time? URL: http://digital.ni.com/public.nsf/allkb/4F9D107D8B26233B86256F250057C9B3

Does NI Calibrate SCC Products? SCC products can be calibrated, but are not done through NI services. The cost for NI to calibrate SCC products is not reasonable considering the low cost of the SCC devices. URL: http://digital.ni.com/public.nsf/allkb/D68B47C20221945A86256F230067CEB6

Accelerometer Resonant Frequency Control Missing in DAQmx When setting up an accelerometer channel in Traditional NI-DAQ, I have the option to set the resonant frequency; however, when setting up an accelerometer channel in NI-DAQmx, that option is nowhere to be found. Is that option hidden somewhere, or does it simply not exist? If it doesn't URL: http://digital.ni.com/public.nsf/allkb/BE14EDB0C6B6D54986256F1C0071EB42

Which DIO lines are Reserved for Communication on a TEDS SC-2350 Carrier? When using TEDS class II sensors which DIO lines are available for use and which ones are reserved? URL: http://digital.ni.com/public.nsf/allkb/D3E1C1FBBF2E265F86256F1C006BC405

How Should an SCC-RLY01 Module Be Connected I am using an SCC-RLY01 module, and I need to know how to connect it to my device. URL: http://digital.ni.com/public.nsf/allkb/913EE0DA7B22077C86256F0E005401C0

Offset Nulling with the SCC-SG24 I am using the SCC-SG24 module for strain measurements. When I use the potentiometers to null the offset of my strain gage, the signal remains the same. The offset is still present regardless of how I adjust the nulling potentiometer. What am I doing wrong? URL: http://digital.ni.com/public.nsf/allkb/D58D0C7EA466DC0786256F05006E77DE

Offset Nulling with the SCC-SG24 I am using the SCC-SG24 module for strain measurements. When I use the potentiometers to null the offset of my strain gage, the signal remains the same. The offset is still present regardless of how I adjust the nulling potentiometer. What am I doing wrong? URL: http://digital.ni.com/public.nsf/allkb/9B2FA1CB0CA6384386257168004EE8FE

Using the SC-2345 in Measurement and Automation Explorer with Traditional DAQ? How do I configure and test the SC-2345 in Measurement and Automation Explorer (MAX) if I am using Traditional DAQ? URL: http://digital.ni.com/public.nsf/allkb/BB29BE4658861E4986256F0400617F4B

Which Wire Maps to Which Pin on the R6868 Ribbon Cable? Which wire in the R6868 ribbon cable maps to which pin on the connector? URL: http://digital.ni.com/public.nsf/allkb/68756E439A63892186256EDE005EFD8A