How do I Transfer Tasks, Virtual Channels, and Custom Scales to Another Computer?
I have created several tasks, virtual channels, and custom scales that are specific to a LabVIEW program that I would like to move to another computer. How can I easily transfer these things to the new computer?
URL: http://digital.ni.com/public.nsf/allkb/42A2D212796B3DC2862571FF0061B402
|
SCC-A10 Measurements Show Up As NRSE In MAX
I’m taking voltage measurements using a SCC-A10 which has two Differential analog input channels. When selecting these channels in Measurement & Automation Explorer, I only see the NRSE input configuration, why is this?
URL: http://digital.ni.com/public.nsf/allkb/62729EF57DAD7DEE862571FE0000D31A
|
Are there Reserved Digital Lines on SC Carriers?
I have an SC-2345 or SC-2350. I know that SCXI chassis have reserved digital lines for communication between the DAQ card and SCXI backplane. Does the same situation apply for an SC system?
URL: http://digital.ni.com/public.nsf/allkb/078B69B3DD77FBC1862571FB0051B637
|
What is the Part Number for the High Voltage Backshell Used with the SCC-RLY01?
I am connecting high voltages (>60VDC) to my SCC-RLY01 and I need to order the high voltage backshell referenced on page 4 of the user guide. What is the part number for this accessory?
URL: http://digital.ni.com/public.nsf/allkb/1DBE9E04C5A39187862571FB00615A31
|
Does an Omega RTD-860 work with an SCC-RTD01?
I can't get the RTD-860 to work properly with the SCC-RTD01. Is it compatible at all?
URL: http://digital.ni.com/public.nsf/allkb/F11162A2D8F850D6862571D50060DDF8
|
Can I Use NRSE Mode on the Extra Analog Input Lines of my DAQ Card with a SC-2345?
I have a SC-2345 for signal conditioning connected to my DAQ board and I am using AI modules to take measurements. I want to connect more signals directly to the SC-2345. Can I use NRSE on the extra AI lines on the SC-2345 carrier?
URL: http://digital.ni.com/public.nsf/allkb/2B0E21AF627AFA65862571D2002D86D4
|
Inconsistent Temperature Readings Between Multiple Channels In NI-DAQmx Tasks
I created a DAQmx Temperature task to take readings from multiple thermocouple channels. On the Thermocouple Setup screen, I set the Thermocouple Type according to my sensor, as seen in the following image:
URL: http://digital.ni.com/public.nsf/allkb/D40CC052881A5B708625715600720C22
|
SCC Modules in SCC-68 Rail
When an SCC module is placed in an SCC-68 the signals appear to rail and no readable signal can come through. Everything seems to be connected properly for the sensor, but nothing seems to make it read properly.
URL: http://digital.ni.com/public.nsf/allkb/28FDBEE244472A408625714100803DC9
|
SC-2345, SC-2350, and CA-1000 Chassis Size and Panelette Capacity
How many SCC panelettes can fit on each side of a SC-2345, SC-2350, or CA-1000 chassis?
URL: http://digital.ni.com/public.nsf/allkb/6F918A8CE560ECF38625711D0065F949
|
What Connector Will Mate With the Female 4-Pin MIL-C-26482 SCC Panelette?
I have a Female 4-Pin MIL-C-26482 (Series 1), MS3112, Size 8 SCC Panelette. What mating connector do I purchase?
URL: http://digital.ni.com/public.nsf/allkb/808731A8E33565C4862570D20076052B
|
