Cart
|
Help
NI Home
>
Support
> KnowledgeBase
KnowledgeBase
Select your country
Category(s) Selected
[
start over
]
Document Languages
: English [
remove
] ,
Hardware
: SCC [
remove
] ,
1-10 of
98
KnowledgeBase [
see results below
]. To refine your results, select another category.
Software
Driver Software
(4)
Utility Software
(3)
Hardware
Carriers
(42)
Modules
(37)
Question Type
Bug Fix/ Error Message/ Error Code
(2)
FAQ
(12)
Install/Config
(19)
Programming
(10)
Specifications/ Documentation
(46)
Unexpected Behavior/ Bad Reading
(9)
Search KnowledgeBase Documents:
Sort by:
Date (Most recent)
Title (A-Z)
1-10 of
98
Next
3-slot Blank Signal Connection Panelettes
I received some blank 3-slot signal connection panelettes along with my SC-2345 instrument. I am interested in buying more, but the documentation provided on the website doesn't specify how wide the blank signal connection panelettes are. Where can I find the 3-slot panelettes?
URL:
http://digital.ni.com/public.nsf/allkb/06A6F3C518D76AB18625743B0040F542
Can I Use Remote Sense with the SCXI-1520 Configured for Quarter-Bridge Measurements?
I am using the SCXI-1520 to perform quarter-bridge strain gage measurements. Since I have long leads connecting the strain gages to the SCXI-1520, I would like to use remote sense to eliminate error introduced by lead resistance. I have referred to Figure 2-8 of the
URL:
http://digital.ni.com/public.nsf/allkb/DDA796448F12FE0F862573FD006F53E2
Different Types of Isolation: Channel-to-Channel, Bank (Channel-to-Bus), and Channel-to-Earth Ground Isolation
What are the differences between the types of electrical isolation NI offers on devices? I do not understand the differences between channel-to-channel, bank (channel-to-bus), and channel-to-earth ground isolation.
URL:
http://digital.ni.com/public.nsf/allkb/CF71091043A6193B862573D70077138B
Do I Need the Ref5V Pin on SCC-AI Series Modules?
I want to use my own carrier for the SCC-AI series modules. What do I connect to Pin 12 (Ref 5V).
URL:
http://digital.ni.com/public.nsf/allkb/2561509A98D2A0B3862573A8004FE19B
How Can I Test a Device that Requires Excitation in MAX?
I am testing my SCXI device using test panels in Measurement & Automation Explorer (MAX) but the values aren't what I'm expecting. Is something wrong with my device?
URL:
http://digital.ni.com/public.nsf/allkb/C2553DEE2E3CF1BE862573A30062C1F3
How Can I Use the CJC on the SCC-68 to Read the Ambient Room Temperature
I would like to use the CJC sensor to read the ambient temperature of the room. How can I access and scale this signal?
URL:
http://digital.ni.com/public.nsf/allkb/E12DDF30E0E828B58625732A004D11A4
Where Can I Find The Warranty For My NI Hardware?
I'm trying to find the warranty information for my NI hardware. Where can I find it?
URL:
http://digital.ni.com/public.nsf/allkb/8341879DC763DF5886257289005D816E
Thermocouple Accuracy Table by Type and Temperature
I am reading the temperature of a chamber using two thermocouple of the same type but the readings are different. I have calculated the accuracy of my measurement hardware but it does not compensate for the difference in readings. What may be causing this phenomenon?
URL:
http://digital.ni.com/public.nsf/allkb/776AB03E065228408625727B00034E20
Why Do I Receive Error -200619 When Trying To Acquire Data With Multiple SCXI Modules?
I am trying to acquire data with multiple National Instruments Data Acquision cards and multiple SCXI modules in a single chassis.I have connected each card to each module in a parallel configuration but when I try to run my application I get 'Error -200619: Chassis cannot be used for more
URL:
http://digital.ni.com/public.nsf/allkb/AD469F16D62851168625723A006DEB12
What SCC Modules are Supported by the SCC-68?
I’m looking to purchase a few SCC modules to use with the SCC-68. Are all the SCC modules supported by the SCC-68?
URL:
http://digital.ni.com/public.nsf/allkb/4592E570D078320886257211000C7CF0
Sort by:
Date (Most recent)
Title (A-Z)
1-10 of
98
Next
Search KnowledgeBase Documents: