Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Which Cables or Accessories Do I Need to Connect a DAQ Device to an SSR Backplane? There are several DAQ and DIO devices which can be connected to an SSR Backplane (Digital Signal Conditiong Backplane). Which devices are compatible, and which cables or accessories do I need to make the connection? URL: http://digital.ni.com/public.nsf/allkb/5325E710371BED4486256D4900463AC1

How Do I Access the Unused Pins of my DAQ Card when using SC-204x or AMUX? I am using a SC-2040 with my E-Series DAQ card but I still need to be able to use the analog output and counter functionality. URL: http://digital.ni.com/public.nsf/allkb/C73CEF550A561DE786256CE60065C7A2

Error -10007 When Using the AMUX-64T with a DAQ Device I am entering the valid channel string for the AMUX-64T in Measurement & Automation Explorer (MAX) and LabVIEW to read from a channel of the AMUX-64T. Why do I receive error -10007 when using the AMUX-64T with a data acquisition (DAQ) device? URL: http://digital.ni.com/public.nsf/allkb/474269A422CEF85286256C870006F2B8

Does National Instruments Support the 5B-02 Backplane for Use with its Data Acquisition (DAQ) Hardware? I have a 5B-02 backplane and 5B modules. Does National Instruments support using it with my DAQ system? URL: http://digital.ni.com/public.nsf/allkb/0CC9AB7049231BB8C1256C6400752276

What is the Difference Between the 5B-01 and 5B-02 Backplanes? What is the basic difference between the 5B-01 and 5B-02 backplanes and why does NI support one and not the other with NI DAQ boards? URL: http://digital.ni.com/public.nsf/allkb/B92F5ECB338569F986256C53006EF274

Why Are All My Analog Input Signals Reading Almost Zero Volts, But Not Floating? I have connected all of my analog inputs to my analog input 5B modules. I have cabled everything to my analog input board. When I take readings, they are not floating, but they are all stuck at approximately zero, though they may change slightly as the input voltage changes.What is wrong? URL: http://digital.ni.com/public.nsf/allkb/0959EF2F354A241186256C30005FDBE0

Determining the Channel Number of a 5B Module How do I determine the data acquisition (DAQ) channel number for each slot on my 5B backplane? URL: http://digital.ni.com/public.nsf/allkb/0F1872302CD4E9A486256BA3007692AA

Can I Use the 5B37 Thermocouple Module with the DAQ Channel Wizard? Problem: Can I Use the 5B37 Thermocouple Module with the DAQ Channel Wizard? Solution: Because the 5B37 has a voltage nonlinearity, it cannot be used with the DAQ channel wizard. URL: http://digital.ni.com/public.nsf/allkb/24CEFB238FB571F286256B9C005C109A

How Do I Verify the Voltage Level Given to My Analog Output Channel on the 5B Backplane? I am having trouble reading the correct voltage with my 5B analog output module. How can I verify the voltage being delivered to the backplane without having the analog output module attached? URL: http://digital.ni.com/public.nsf/allkb/C1D6B455F43CFFD386256AF8005BD3A9

How Do I Connect a BNC-2110 (or BNC-2120) to an E Series Device via an SC-2056? I would like to use a BNC-2110 (or BNC-2120) with a 100-pin E Series device that has 64 analog input (AI) channels. I have an SC-2056 connected to my device with an SH100100 cable. How do I connect a BNC-2110 or BNC-2120 to the SC-2056? URL: http://digital.ni.com/public.nsf/allkb/A3C2F96D5749513D86256AAF006E8B91