Why is the Digital Output Line 1 on my PCI-7390 Not Working?
I have a PCI-7390 motion controller and I am trying to use the digital output lines. When using line 0 on the ports related to axis 1, 2, 3 and 4, I am able to change the line state. But when I try to change the line state with line number 1, I do not get the results I am expecting. How can I
URL: http://digital.ni.com/public.nsf/allkb/9264ECD5CB2BF56E8625727D00099A71
|
Configure and Test a Stepper Motor
How do I configure my NI 73XX motion controller to control my stepper motor?
URL: http://digital.ni.com/public.nsf/allkb/9675C83F037811F68625727C0002A4A5
|
How do I synchronize 2 NI-Motion Control Boards?
Is it possible to synchronize 2 or more NI-Motion control boards? If so, how do I do it?
URL: http://digital.ni.com/public.nsf/allkb/D611E9F18CF4A2018625727B004CEA09
|
NI 9505 Module Chassis Power LED is not Illuminated when Plugged into a Powered cRIO Chassis
My cRIO chassis is powered up and working properly, but the green power LED is not on, even though the NI 9505 Operating Instructions say... 'The Power LED (green) illuminates when the NI 9505 is properly inserted into a
URL: http://digital.ni.com/public.nsf/allkb/45E16F3A9F1A25508625727A007E5679
|
Axis Stops Working when using 'Configure Axis Resources.flx'
I am able to control all of my Axis in MAX without any problem, but when I try to setup my feedback in LabVIEW using 'Configure Axis Resources.flx', I cannot get my Axis to work. What am I doing wrong?
URL: http://digital.ni.com/public.nsf/allkb/0098756B8B8C85DF8625723E0006002F
|
What is the Difference Between P-Command and Stepper when Using National Instruments Motion Products?
I have heard that Position Command (P-Command) is similar to stepper control and I want to know what the difference is between the two. So, what is the difference between P-Command and Stepper when using National Instruments Motion Products?
URL: http://digital.ni.com/public.nsf/allkb/7D26773D145497428625723E0009B0A0
|
What is the difference between the PCI-7390 and the PCI-733x?
Both the PCI-7390 and the PCI-733x controller can operate in a p-command (Position Command) mode and a stepper mode, what is the difference between the two motion control boards?
URL: http://digital.ni.com/public.nsf/allkb/5E464CE52E92F3758625723E000EE9E5
|
Velocity Filter Settings in NI-Motion
I am using the NI-Motion driver, and I would like to filter the velocity from my encoder feedback. What do the velocity filter settings mean, and how can they be set?
URL: http://digital.ni.com/public.nsf/allkb/500890E58463AB668625723500760EE7
|
Digital Output on Motion Controller Not Functioning
I have a PCI-7350 and am trying to output signals on the DIO lines in Measurement and Automation Explorer (MAX) and using Set I/O Port MOMO.flx. I can read the inputs on the first port, but line 5 on the second port never has any output and I never see any output on the third port. Why do my
URL: http://digital.ni.com/public.nsf/allkb/6363F79BE8031EF38625722D007D5E65
|
Changing Motion Controller Settings on Default 73xx Settings Page in MAX
I am using a PCI or PXI NI Motion device, and I have selected and saved settings for each individual axis in MAX. When I go to the page titled 'Default 73xx Settings' and make any selections, it immediately erases all of my previous settings. Is this expected behavior?
URL: http://digital.ni.com/public.nsf/allkb/0C34A033AAC0EA7C8625721700741D36
|
