Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Can the cRIO Controller Handle DC Voltage Fluctuation? I am powering a CompactRIO from a battery. Can the cRIO controllers handle the fluctuations that might occur on the DC supply? URL: http://digital.ni.com/public.nsf/allkb/F8DDF3BDBC3A411B8625743D002CE144

National Instruments cRIO-9014 Disk On Chip Change Notification The cRIO-9014 revision G or later Real-Time Controller will be shipped with a different 2GB nonvolatile storage Disk On Chip than previous revisions. URL: http://digital.ni.com/public.nsf/allkb/7D7241BE9C7D581F86257435006CB9A2

NI 9219 Convert FXP to Thermocouple VI I am using NI-RIO 2.4 with fixed point I/O and an NI 9219 in a CompactRIO. How can I convert the FXP channel value in the real-time controller or host PC to temperature units, accounting for the CJC value? URL: http://digital.ni.com/public.nsf/allkb/22C1D4F68DD27B6286257434005EA8F7

How Does Offset Nulling in DAQmx work for the SCXI-1520 and the NI 9237? What is offset nulling and how is it different between the SCXI-1520 and the NI 9237? URL: http://digital.ni.com/public.nsf/allkb/76FB3F1EC361E64E8625742B0070A4E9

How do I know if my FPGA VI can be compiled on a chassis I have no access to currently? I have successfully compiled my FPGA VI on a 3M gate cRIO FPGA chassis. How can I find out if I can successfully use this VI on another chassis with fewer number of gates? URL: http://digital.ni.com/public.nsf/allkb/E34D8CCAF3C4F108862574280031CD2E

Error -63001 NI-RIO FPGA Communications Occurs With DMA Transfers From Host to FPGA I am trying to do a Direct Memory Access (DMA) transfer from the 900x compactRIO Real-Time (RT) controller to the FPGA. The FPGA code compiles; however, when I run the code I get a Real-Time error saying the following:Error -63001: URL: http://digital.ni.com/public.nsf/allkb/257AF49E2110630F8625741F0062D292

Error -200980 when using DAQmx Event with NI USB-9263 I am using the DAQmx "Every N Samples Transferred from Buffer" event with the NI USB-9263 but receive the following error message when I try to run the code: Error -200980 Possible reason(s): URL: http://digital.ni.com/public.nsf/allkb/250113A02E07E332862574170058A928

Error 50150 - Reboot USB 9162 after upgrading to DAQmx 8.7 Immediately following an upgrade to DAQmx 8.7 and using a USB-9162, a user may see error 50150 when attempting to use the device until they restart Measurement and Automation Explorer (MAX) or reboot. The Found New Hardware Wizard may also prompt you to reboot. USB-9162 devices should not URL: http://digital.ni.com/public.nsf/allkb/D046874B01378D42862574170072561E

What Units Are Returned from C-Series Analog Modules when using Fixed-Point Data? I am using Fixed-Point Data in my FPGA project for my C-series analog modules. What units will be returned with this data? URL: http://digital.ni.com/public.nsf/allkb/C18C172029D187CA8625741600664D89

How Do I Save and Re-use Offset Null Information for Strain Measurements with the NI 9237 or NI SCXI-1520? I used to be able to import calibration information with strain measurements tasks when using SCXI. These settings included the Fine and Coarse potentiometer settings used for the offset null settings. When I try to import these settings using a NI 9237, I receive the following error: URL: http://digital.ni.com/public.nsf/allkb/3EE953A31538B99C8625740F00662FCF