Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
KnowledgeBase

Category(s) Selected [start over]

Document Languages
: English [remove] ,
Hardware
: CompactRIO [remove] ,
21-30 of 191
KnowledgeBase [see results below]. To refine your results, select another category.
Software
LabVIEW Development Systems (8)
LabVIEW Modules (41)
Calibration Executive (1)
Driver Software (29)
LabVIEW Signal Express (3)
LabWindows/CVI Add-ons (1)
Lookout (3)
Measurement Studio (3)
Utility Software (4)
Hardware
Chassis (Backplanes) (26)
Controllers (67)
Analog Input Modules (51)
Analog Output Modules (11)
Digital Input Modules (8)
Digital Output Modules (9)
Question Type
Bug Fix/ Error Message/ Error Code (26)
FAQ (41)
Install/Config (26)
Programming (29)
Specifications/ Documentation (55)
Unexpected Behavior/ Bad Reading (14)

Sort by:
21-30 of 191
|
Required Software for NI-987x Module for cRIO It is important to note that the NI-Serial - Windows Vista x64/2000/Vista x86/XP - NI-987x Module is only needed separately if using LabVIEW 8.5.x with NI-RIO 2.4.x. All versions after LabVIEW 8.5.x (NI-RIO 2.4.x) will obtain support for the NI-987x modules from the NI-RIO driver. URL: http://digital.ni.com/public.nsf/allkb/72858E9FE36630B586257458005CF420
Deploying Applications with Sound and Vibration in a cRIO I made my application for order analysis, and when I deploy the application to the target I get the following errors during the deployment: Failed to Download OAT Frecuency Shift (Mixer).vi or URL: http://digital.ni.com/public.nsf/allkb/C1155A2BE0234B04862574550064C3F5
Why Does the cRIO Hangs when Resetting the Controller with System Reset? When I set the System Reset IO to TRUE on the FPGA, my cRIO hangs. Why does this happen? URL: http://digital.ni.com/public.nsf/allkb/C3B8A3D27D676FA08625744200528D94
Switching Between Calibrated Fixed-Point and Raw Integer Modes for CompactRIO I/O How can I select either calibrated fixed-point or raw integer data types for the I/O nodes of my C-Series module? URL: http://digital.ni.com/public.nsf/allkb/F4ECE2EDDA91E5A386257441005D897E
National Instruments cRIO-9014 Disk On Chip Change Notification The cRIO-9014 revision G or later Real-Time Controller will be shipped with a different 2GB nonvolatile storage Disk On Chip than previous revisions. URL: http://digital.ni.com/public.nsf/allkb/7D7241BE9C7D581F86257435006CB9A2
NI 9219 Convert FXP to Thermocouple VI I am using NI-RIO 2.4 with fixed point I/O and an NI 9219 in a CompactRIO. How can I convert the FXP channel value in the real-time controller or host PC to temperature units, accounting for the CJC value? URL: http://digital.ni.com/public.nsf/allkb/22C1D4F68DD27B6286257434005EA8F7
How Does Offset Nulling in DAQmx work for the SCXI-1520 and the NI 9237? What is offset nulling and how is it different between the SCXI-1520 and the NI 9237? URL: http://digital.ni.com/public.nsf/allkb/76FB3F1EC361E64E8625742B0070A4E9
How do I know if my FPGA VI can be compiled on a chassis I have no access to currently? I have successfully compiled my FPGA VI on a 3M gate cRIO FPGA chassis. How can I find out if I can successfully use this VI on another chassis with fewer number of gates? URL: http://digital.ni.com/public.nsf/allkb/E34D8CCAF3C4F108862574280031CD2E
Error -63001 NI-RIO FPGA Communications Occurs With DMA Transfers From Host to FPGA I am trying to do a Direct Memory Access (DMA) transfer from the 900x compactRIO Real-Time (RT) controller to the FPGA. The FPGA code compiles; however, when I run the code I get a Real-Time error saying the following:Error -63001: URL: http://digital.ni.com/public.nsf/allkb/257AF49E2110630F8625741F0062D292
Error -200980 when using DAQmx Event with NI USB-9263 I am using the DAQmx "Every N Samples Transferred from Buffer" event with the NI USB-9263 but receive the following error message when I try to run the code: Error -200980 Possible reason(s): URL: http://digital.ni.com/public.nsf/allkb/250113A02E07E332862574170058A928
Sort by:
21-30 of 191
|