Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Is the PCI/PXI-6723 Compatible with the BNC-2115? I have a PCI/PXI-6723 with two 68-pin connectors in the front. I see that Connector 0 can connect to a BNC-2110 becuase it has pins for digital, PFI, and counter lines, along with analog output channels 0 through 7. I see that Connector 1 has pins for analog output channels 8 through URL: http://digital.ni.com/public.nsf/allkb/9F83E6261786CFDB8625727B0020E13D

External Triggering on the PCI-5411. I have connected my external trigger to the EXT TRIG SMB connector on the front of my PCI-5411. How do I setup the external trigger in software to use that pin? URL: http://digital.ni.com/public.nsf/allkb/37A4EC7B5A32D346862572730076E873

Why Do I Get Error -89125? When I try to access the trigger lines on my device, I get the following error.Error -89125 'Device not configured'.Why does this error occur? URL: http://digital.ni.com/public.nsf/allkb/281704A664FB80BC862572700001410E

'Device not found' or 'Invalid Output Mode' Error When Using PXI-5402 in Arbitrary Waveform or Arbitrary Sequence Mode My PXI-5402 will not allow me to use the NIFGEN Arbitrary Function Generator Express VI in LabVIEW. It reports 'Device not found'. The card works fine with the FGEN SOFT FRONT PANEL and it also works fine in LabVIEW when using frequency lists for generating various waveforms. However, examples URL: http://digital.ni.com/public.nsf/allkb/69D980AB071A1E84862572600005E475

Why Does the Frequency Oscillate in the Output of My PCI-6733? I am trying to generate a square wave of 10682 Hz with an update rate of 800 kS/s on the PCI-6733. Why does the frequency of the output signal oscillate? Why am I not getting a stable frequency output? URL: http://digital.ni.com/public.nsf/allkb/677C0219BFC9CE2886257252002CE600

Why is the Amplitude of the NI 54xx's Output Signal Twice as Large as the Setting in the NI-FGEN? I am using a TDS1002B oscilloscope to measure the output signal of a NI PXI-54xx. I found the measured signal was twice as large as the setting in the NI-FGEN. Why is the amplitude twice the setting and how do I correct for this? URL: http://digital.ni.com/public.nsf/allkb/E6FCA8226A164202862572110046E717

Oscillating Analog Output Signal from PCI-6704 I am using a PCI-6704 board to drive my external circuit. When I output 5 volts to my circuit, the output signal measures 4.4 volts. If I measure the value of my analog output signal when the card is not connected to my external device, I measure the expected 5 volts. Why do I see a URL: http://digital.ni.com/public.nsf/allkb/B0DA63E0671E61A086257210007DD4D5

Effects of Offset on Waveform Resolution Using NI-5401 Function Generator How does adding an offset affect the resolution of a waveform generated with the NI-5401 Function Generator? URL: http://digital.ni.com/public.nsf/allkb/71FDC1F044D0CE26862571F800779DD7

Traditional NI-DAQ (Legacy) Function Reference Includes Two Device Codes for the NI PCI-6711 The Traditional NI-DAQ (Legacy) Function Reference Help includes 261 and 262 as device codes for the NI PCI-6711. Is one of these device codes for the NI PXI-6711? URL: http://digital.ni.com/public.nsf/allkb/0C7EE736888CC30C862571E70051C4A2

What Do All of the Pinout Terms Mean? I'm looking at the pinout diagram for my DAQ card and I do not understand what it's talking about. What does all this mean? URL: http://digital.ni.com/public.nsf/allkb/B478F1BC6556FA2F862571C0007E6062