Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Do 446x and 445x Series DSA Boards have a 42.4V Maximum Range? The 446x and 445x series DSA boards have a rated maximum voltage range of 42.4 volts. Why is the voltage greater compared to the 447x series (10V), and why is it a seemingly odd number? URL: http://digital.ni.com/public.nsf/allkb/DB66012D26B6CB378625732F00571C47

Driving Loads with the PCI/PXI-6704 Gives Inconsistent Results I am doing current output to drive a load with the PCI/PXI-6704, I am expecting to see 5 volts across the load. When I measure the resulting voltage, it seems to rail and/or fluctuate between 0 and 10 volts. What is going on? URL: http://digital.ni.com/public.nsf/allkb/C3EABE7C30FA253A862572C30072F6A8

Which NI-DAQ Cards Can I Use With My DAQ Signal Accessory? I am interested in using the DAQ Signal Accessory with a data acquisition device. Which data acquisition devices is this accessory compatible with? URL: http://digital.ni.com/public.nsf/allkb/E013D88AD2C1B8E6862572C2007F9FD5

Frequently Asked Questions about Streaming Waveforms using NI-FGEN I receive Error -1074118518 or Error -1074118520 when I try to stream waveform data using NI-FGEN. What is causing these errors? URL: http://digital.ni.com/public.nsf/allkb/F966BB54C613BF7986257299007E6690

NI-FGEN Simulated Devices I would like to program using the NI-FGEN driver but do not yet have the hardware. How can I simulate the device so that I can test my programming? URL: http://digital.ni.com/public.nsf/allkb/07A1DC2A64B4F0A38625729A00065771

Letter of Volatility for Analog Output Devices I need official National Instruments confirmation that sensitive data passing through your Analog Output products will be erased when the device loses power. URL: http://digital.ni.com/public.nsf/allkb/DCC8D8C32839FCD78625727F0073E9DA

Frequency Resolution of the NI-54XX Series What are the different frequency resolutions of the NI-54XX Function Generator (FGEN) boards? URL: http://digital.ni.com/public.nsf/allkb/1B9EECADD8C1D9978625727D007F8B55

Is the PCI/PXI-6723 Compatible with the BNC-2115? I have a PCI/PXI-6723 with two 68-pin connectors in the front. I see that Connector 0 can connect to a BNC-2110 becuase it has pins for digital, PFI, and counter lines, along with analog output channels 0 through 7. I see that Connector 1 has pins for analog output channels 8 through URL: http://digital.ni.com/public.nsf/allkb/9F83E6261786CFDB8625727B0020E13D

External Triggering on the PCI-5411. I have connected my external trigger to the EXT TRIG SMB connector on the front of my PCI-5411. How do I setup the external trigger in software to use that pin? URL: http://digital.ni.com/public.nsf/allkb/37A4EC7B5A32D346862572730076E873

Why Do I Get Error -89125? When I try to access the trigger lines on my device, I get the following error.Error -89125 'Device not configured'.Why does this error occur? URL: http://digital.ni.com/public.nsf/allkb/281704A664FB80BC862572700001410E