NI 6115 EEPROM Update Utility
An issue was identified where certain revisions of the PCI and PXI 6115 were built with an incorrect register setting. This issue does not affect applications where analog input is used by itself, but it can affect applications where AI is used in conjunction with analog output, digital
URL: http://digital.ni.com/public.nsf/allkb/82DCFAEAF926EB198625741F0061807B
|
Can I Use a Clock Signal From My USB Device As The Source For My Timed Loop?
I would like to use a clock signal from my USB device as the source for my timed loop. I know that there are several timebases that are faster and/or more accurate than my computers 1kHz clock. When I specify the device as my source, I get an error saying this is not supported by my device.
URL: http://digital.ni.com/public.nsf/allkb/0DB07AD09DD65AC58625741D007867DA
|
Error -88705 With USB-621x Device After Upgrading to NI-DAQmx 8.7
I just upgraded to NI-DAQmx 8.7. Why am I receiving Error -88705 with my USB-621x device?
URL: http://digital.ni.com/public.nsf/allkb/97269DACEB7D13AD86257417006BEE5A
|
Error 50150 - Reboot USB 9162 after upgrading to DAQmx 8.7
Immediately following an upgrade to DAQmx 8.7 and using a USB-9162, a user may see error 50150 when attempting to use the device until they restart Measurement and Automation Explorer (MAX) or reboot. The Found New Hardware Wizard may also prompt you to reboot. USB-9162 devices should not
URL: http://digital.ni.com/public.nsf/allkb/D046874B01378D42862574170072561E
|
Does NI have a VHDCI to VHDCI Cable?
I need to connect two devices which both have VHDCI connections. Is this possible to do without a custom cable?
URL: http://digital.ni.com/public.nsf/allkb/EAFF9E5CD49C352E862574110079BCEB
|
How to Build a Current Loop System with Isolated M Series?
I want to build a 4 - 20 mA current loop system with Isolated M Series Device. Which module should I use and configurations are possible?
URL: http://digital.ni.com/public.nsf/allkb/28DEBF6F355C828E862573F70003B5BC
|
USB-621x Can Generate Unexpected Values with NI-DAQmx 8.7
When using NI-DAQmx 8.7 driver software, NI USB-621x devices (USB bus-powered M Series multifunction DAQ) may generate unexpected values on the analog output channels. National Instruments released NI-DAQmx 8.7.1 to fix this problem. This behavior does not occur in previous versions of
URL: http://digital.ni.com/public.nsf/allkb/58C3C3F69606C1B8862573EF00802143
|
Acquiring On-Board Temperature from a PCI-6704 Static Analog Output Module
How can I read the on-board temperature sensor of a PCI-6704 data acquisition (DAQ) device?The text below appears in the user manual, but it does not explain how to actually acquire the device temperature? The onboard temperature sensor measures the air temperature
URL: http://digital.ni.com/public.nsf/allkb/B04ECBEA61188801862573E7006DD98B
|
Some Manuals Provide Incorrect Instructions for Accessing the Device Documentation Browser
Some DAQ hardware documentation indicates that Start menu shortcuts exist for device documents. However, when I try to access these shortcuts, they are not installed on my system. Have the shortcuts moved?
URL: http://digital.ni.com/public.nsf/allkb/AAB917E1AB320301862573E00074E982
|
Different Types of Isolation: Channel-to-Channel, Bank (Channel-to-Bus), and Channel-to-Earth Ground Isolation
What are the differences between the types of electrical isolation NI offers on devices? I do not understand the differences between channel-to-channel, bank (channel-to-bus), and channel-to-earth ground isolation.
URL: http://digital.ni.com/public.nsf/allkb/CF71091043A6193B862573D70077138B
|
