Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
KnowledgeBase

Category(s) Selected [start over]

Document Languages
: English [remove] ,
Hardware
: Digital I/O (DIO) [remove] ,
21-30 of 258
KnowledgeBase [see results below]. To refine your results, select another category.
Software
LabVIEW Development Systems (10)
LabWindows/CVI Development Systems (1)
Driver Software (29)
Measurement Studio (2)
Other NI Software (1)
Utility Software (1)
Hardware
High-Speed (139)
Isolated (40)
Static (46)
Question Type
Bug Fix/ Error Message/ Error Code (16)
FAQ (26)
Install/Config (26)
Programming (50)
Specifications/ Documentation (114)
Unexpected Behavior/ Bad Reading (26)

Sort by:
21-30 of 258
|
Termination and Cabling Considerations for HSDIO What considerations should I take into account when probing (also commonly known as "bus sniffing" or "snooping") the data bus with a HSDIO device? And where should I probe with respect to the transmitter and receiver? URL: http://digital.ni.com/public.nsf/allkb/72579EBFD781E95E862572AD0001FEDD
Extending your HSDIO Maximum Clock Rate with SerDes How can I read a serial bitstream that is faster than the HSDIO maximum clock rate? Likewise, can I generate a serial bitstream at a higher clock rates? How can this be implemented with serializers and deserializers (SerDes), and which products does National Instruments recommend? URL: http://digital.ni.com/public.nsf/allkb/8D92A482ED857CD5862572A600719F2E
What Differential Voltages Correspond to High and Low Logic Levels in CAN Protocol? I would like to acquire my CAN signals through a data acquisition board and to do so I need to know how to interpret the voltages on the differential lines (CAN_H and CAN_L) as logic levels high (dominant) and low (recessive). URL: http://digital.ni.com/public.nsf/allkb/F35676D3065CF292862572A400716B77
Where Can I Find The Warranty For My NI Hardware? I'm trying to find the warranty information for my NI hardware. Where can I find it? URL: http://digital.ni.com/public.nsf/allkb/8341879DC763DF5886257289005D816E
How do I synchronize multiple 653X devices in DAQmx? I have multiple 653X devices in my PC and I need to synchronize them with an shared clock. URL: http://digital.ni.com/public.nsf/allkb/F2B1273160F9C9E7862572820058537F
HSDIO Data Width and Memory Allocation What is the definition of data width with regards to my HSDIO device, and how does it affect the memory allocation per channel? URL: http://digital.ni.com/public.nsf/allkb/E5170A54988EF81A8625725A006103BB
Triggering An Acquisition Session of a HSDIO Device I have configured my HSDIO acquisition session to have a digital start trigger. However, I am receiving a timeout error because it is not seeing the trigger. Why? URL: http://digital.ni.com/public.nsf/allkb/CDF43A02E6BB55098625724B00797F88
Pattern Regeneration with PCI-6534 vs. PCIe-6536/37 I have an application developed for the PCI-6534 that performs pattern regeneration by storing a digital pattern in the onboard memory. I am interested in upgrading to the PCIe-6536 or PCIe-6537, but these cards do not have much onboard memory available for pattern storage. Where are URL: http://digital.ni.com/public.nsf/allkb/9CBE51490EA197EC86257245005C5443
Can the PXI-565x be Used as a Clock for the PXI-6562? I would like to use an external clock for my NI HSDIO PXI-6562. The clock frequency is greater than the PXI-5404 can provide (105 MHz). Since the PXI-565x can generate a sine wave at the required rate, can I use this signal for the clock of my PXI-6562? URL: http://digital.ni.com/public.nsf/allkb/E081CCFDC1A1850386257243005A8DDE
'Not Responding to Base Address' Error in MAX when Running Traditional DAQ Test Panel with PCI-DIO-32Hs Board Connected to SSR Backplane. I have a PCI-DIO-32HS connected to a SSR backplane. When I open a Traditional NI-DAQ driver test panel in MAX, it gives me a 'Not Responding to Base Address' error. URL: http://digital.ni.com/public.nsf/allkb/DD63499842CCE47486257243000F8C46
Sort by:
21-30 of 258
|