Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

How Many GPIB USB Controllers Can I Use At Once? I need to use multiple GPIB Boards in one system. How many GPIB-USB-B and/or GPIB-USB-HS controllers can I use in a PC at the same time? URL: http://digital.ni.com/public.nsf/allkb/EDE8FFEA3C713A5B862570D700093BA9

Using Multiple USB Devices with Limited Power When I plug in multiple NI or other third party USB devices, they seem to malfunction. Why does this behavior occur? URL: http://digital.ni.com/public.nsf/allkb/B95D2CEF25C6E2928625709A004B4A6E

Connecting an NI Ethernet-Configurable Device to a Wi-Fi Enabled Laptop I'm having difficulty connecting to my NI ethernet-configurable device (FieldPoint, PXI controller, ENET, etc.) with my Wi-Fi enabled laptop. How do I access this instrument? URL: http://digital.ni.com/public.nsf/allkb/7598F35FABADED2E8625709300768FAF

Where Should My PXI-8232 Show Up in MAX? My PXI-8232 is in slot 2 of my PXI chassis. That slot shows up empty in MAX, but I can see a new GPIB card under devices and interfaces. URL: http://digital.ni.com/public.nsf/allkb/D72E253A658A005C86256FE200761186

Using a Second PXI Network Card with my PXI Real-Time Controller Can I use a PXI ethernet card in my PXI chassis even though there is already a NIC (Network Interface Card) on my PXI-RT series controller? URL: http://digital.ni.com/public.nsf/allkb/4D02E68943F0D46986256F9B006C011B

Firewire (IEEE-1394) Hard-drive Enclosure Compatibility with Real-Time Controllers I have a Firewire hard-drive enclosure that I want to use for data logging purposes in LabVIEW RT. When I connect it to my Real-Time controller via a PXI-8252 Firewire board, the drive doesn't get recognized by the Pharlap RTOS. I have a different Firewire drive which seems to work fine. URL: http://digital.ni.com/public.nsf/allkb/513DA08F2D674C6B86256F9600566D80

GPIB-ENET/100 Device Does Not Appear in the NI Ethernet Device Configuration Utility I have Windows XP with Service Pack 2 installed. When I run the NI Ethernet Device Configuration Utility it does not detect the GPIB-ENET/100 on my network. I have manually configured the device using its Default Hostname and can communicate with my instrument successfully, but it still can URL: http://digital.ni.com/public.nsf/allkb/6792C3335C83E7E286256F7B006F1B20

Using HP Agilent 82357A/82357B GPIB in Measurement & Automation Explorer (MAX) or LabVIEW How can I use my HP Agilent 82357A or 82357B GPIB in Measurement & Automation Explorer (MAX) or LabVIEW? URL: http://digital.ni.com/public.nsf/allkb/F7C187DBF09EBE1186256F550065BD32

Accessing IBIC on a Mac Problem: How do I access Interface Bus Interactive Control (IBIC) on a Mac? Solution: The method used to access IBIC on a Mac computer will depend on what OS you are using. URL: http://digital.ni.com/public.nsf/allkb/1F4AC9A8800D687186256F4900723DD7

ENET/100: Why Does the GPIB Hardware Wizard Fail While Sequentially Verifying Interfaces? I have connected my ENET/100 by cross-over cable to my computer. When I run the GPIB Hardware Wizard, it tells me that the GPIB Sequential Interface has failed. URL: http://digital.ni.com/public.nsf/allkb/8F2B91AA3FFC7A9E86256F25007FC43D