Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

How to Detect a PC in MAX Using Another PC and GPIB I have a laptop with a PCMCIA-GPIB card installed and I am trying to see it in the Measurement & Automation Explorer (MAX) of a desktop PC with a PCI-GPIB card in it. I would also like to see the desktop PC from the MAX on the laptop. Is this possible? URL: http://digital.ni.com/public.nsf/allkb/F1BA9A0A6DEAC8158625727A001655D1

AT-GPIB / Windows 95 - Win32 Compatibility Release Software Restrictions What are the restrictions for the AT-GPIB board with the Windows 95 Win32 Compatibility Release software? URL: http://digital.ni.com/public.nsf/allkb/A6EC56FC9B99850786257275007B36BB

Clocking Frequencies for the TNT5002 Chip Problem: Are there limits on the frequency at which you can clock the TNT5002? Solution: The TNT5002 chip can operate in two modes: PCI4882 (with PCI & GPIB clocked regions) and GEN4882 (which only uses the GPIB clock). URL: http://digital.ni.com/public.nsf/allkb/5575FA003DCE9ECF86257273000F904D

PCMCIA-GPIB Inaccessible after Reinsertion I removed and reinserted my PCMCIA-GPIB or PCMCIA-GPIB+ card. Afterwards, I am unable to access my GPIB instruments. Is there a way to stop this behavior? URL: http://digital.ni.com/public.nsf/allkb/432F074DF98068D4862572610016D807

PCI Simple Communications Controller The Found New Hardware Wizard cannot find the driver for the PCI Simple Communications Controller. What is the PCI Simple Communications Controller and where is the driver? URL: http://digital.ni.com/public.nsf/allkb/77E06491A6EF696E8625726000070545

How Can I Manually Connect Newly Found Hardware to its Driver? The Found New Hardware Wizard comes up when my computer starts, but when I select the Install the software automatically option, the wizard seems to hang. The magnifying glass just keeps spinning. How do I connect the hardware to the driver? URL: http://digital.ni.com/public.nsf/allkb/F3A23D5DE721584D8625723E005F510A

NI-488.2 Driver Software Configuration in DOS NI-PnP.exe is a National Instruments utility that detects which type of NI boards you have installed. If you have a jumpered non-plug and play board, NI-PnP will not automatically detect that your board is in the computer. URL: http://digital.ni.com/public.nsf/allkb/AA0DFA975E95E20D8625723E0009524B

GPIB Hardware and Software Diagnostic Tests In DOS Problem: How can I test my GPIB installation in DOS? Solution: Included with your NI-488.2 driver software are two programs that can be used to test your hardware and software installations:ibtest and ibdiag. URL: http://digital.ni.com/public.nsf/allkb/D89BA82A460B09EB86257237006C1F74

Programming with the GPIB-VXI/C I have a GPIB-VXI/C module and need to know commands to issue and how to issue them. Where can I find this information? URL: http://digital.ni.com/public.nsf/allkb/8B4BFE3CBF5CED1F8625721200822531

GPIB Hardware Configuration for Windows I have a GPIB board and need to know how to install/configure it in Windows 98/95/ME/NT/2000/XP. How can I do this? URL: http://digital.ni.com/public.nsf/allkb/F8F599F9F965224686257206000B99E9