Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
KnowledgeBase

Category(s) Selected [start over]

Document Languages
: English [remove] ,
Hardware
: GPIB [remove] ,
1-10 of 503
KnowledgeBase [see results below]. To refine your results, select another category.
Software
Driver Software (63)
Instrument Drivers/IVI (6)
LabVIEW Development Systems (7)
LabVIEW Modules (3)
LabWindows/CVI Development Systems (5)
Lookout (2)
Measurement Studio (5)
Utility Software (1)
Hardware
Plug-in Controllers (175)
External Controllers/Convertors (129)
ASICs/OEM Products (11)
Support Products (15)
Question Type
Bug Fix/ Error Message/ Error Code (37)
FAQ (22)
Install/Config (93)
Programming (116)
Specifications/ Documentation (221)
Unexpected Behavior/ Bad Reading (14)

Sort by:
1-10 of 503
Using a GPIB PMC Card With a cPCI Bus Is it possible to use the National Instruments PMC GPIB card on a system with a cPCI bus form factor? I want to use this setup because of the smaller form factor of the cPCI bus. URL: http://digital.ni.com/public.nsf/allkb/BDBF2E81013F189C8625742C003A0B5B
LabVIEW and NI-488.2 Version Compatibility What versions of LabVIEW are compatible with different versions of the NI-488.2 driver? URL: http://digital.ni.com/public.nsf/allkb/2BFCEE471BECB95F862574020059117E
What is the Difference Between the GPIB 120A and GPIB 120B in Terms of Isolation? What is the main difference between the GPIB 120A and the GPIB 120B in terms of isolation? URL: http://digital.ni.com/public.nsf/allkb/41A4CB6D2874E12A862573ED003443D3
Getting started with the NI GPIB-485CT-A in serial mode I have configured my NI GPIB-485CT-A in serial mode. I have connected a GPIB device but am unable to communicate with this GPIB device. Can you please help? URL: http://digital.ni.com/public.nsf/allkb/E240FF1B748399D38625734B00272FB0
How to Configure NI Instrument Simulator for GPIB or Serial communication How do I configure the dip switches on my NI Instrument Simulator for the communication interface desired? URL: http://digital.ni.com/public.nsf/allkb/F0C979E8890C06C28625734100183BC9
GPIB-VXI/C Addressing A24 Address Range Error I am trying to setup a new GPIB-VXI/C board but when I try to access a specific A24 address range I get either of the following errors: "Specified offset is not accessible from this hardware." URL: http://digital.ni.com/public.nsf/allkb/5F2CCD73E35CDB18862572F100593E24
Why Does My GPIB-USB-HS Device Prompt the Add Hardware Wizard Each Time I Plug it in? Every time I unplug my GPIB-USB-HS device and plug it back in, the Add Hardware Wizard pops up and re-installs the drivers. Each time this happens I lose all of the device configuration settings. How can I avoid this? URL: http://digital.ni.com/public.nsf/allkb/13B27DA885E3F3D2862572CA0065FF70
Where Can I Find The Warranty For My NI Hardware? I'm trying to find the warranty information for my NI hardware. Where can I find it? URL: http://digital.ni.com/public.nsf/allkb/8341879DC763DF5886257289005D816E
How to Detect a PC in MAX Using Another PC and GPIB I have a laptop with a PCMCIA-GPIB card installed and I am trying to see it in the Measurement & Automation Explorer (MAX) of a desktop PC with a PCI-GPIB card in it. I would also like to see the desktop PC from the MAX on the laptop. Is this possible? URL: http://digital.ni.com/public.nsf/allkb/F1BA9A0A6DEAC8158625727A001655D1
AT-GPIB / Windows 95 - Win32 Compatibility Release Software Restrictions What are the restrictions for the AT-GPIB board with the Windows 95 Win32 Compatibility Release software? URL: http://digital.ni.com/public.nsf/allkb/A6EC56FC9B99850786257275007B36BB
Sort by:
1-10 of 503