Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Is My Executable Deleted when I Power Cycle My TPC-2006? I have created an executable for my TPC-2006 device and saved it to the \My Documents directory. When I cycle the power for the unit, the executable is lost. How can I permanentaly save my executable to my TPC-2006? URL: http://digital.ni.com/public.nsf/allkb/15ED0B1496CCC65A8625730900752057

TPC-2006 / TPC-2012 Support for a USB Keyboard or Mouse Is it possible to connect a USB keyboard or mouse to TPC-2006 or TPC-2012? URL: http://digital.ni.com/public.nsf/allkb/A6F8E330E1517740862572ED003433FE

Power Requirement of NI 9853 How much power is consumed by NI 9853 CAN module from the compact chassis? URL: http://digital.ni.com/public.nsf/allkb/94D85BC912A8F10D862572EC005FAEC9

Error -1074388479 With the NI-9853 Module for CompactRIO I am running one of the shipping examples for the NI-9853 module, and I get Error -1074388479. What does this error mean, and how do I get rid of it? URL: http://digital.ni.com/public.nsf/allkb/29AC2DC64A25527B862572DA00414A04

Timeout Error -301096 Using the ECU Measurement and Calibration Toolkit With a Series 1 NI-CAN board I am using the ECU Measurement and Calibration toolkit with a Series 1 NI-CAN board, and I get Error -301096, a timeout error, when I try to run any of the shipping examples. How do I get rid of this error? URL: http://digital.ni.com/public.nsf/allkb/C54F2138F47C4230862572D2005F0318

Does the USB-8451 Transfer SPI Data by Most Significant Bit First? I have a USB-8451 and I need to know if the device transfers data using most significant bit first (MSB) or least significant bit first (LSB)? URL: http://digital.ni.com/public.nsf/allkb/3D064496CEA9A821862572D0000341B0

Writing and Reading to the DIO Port on USB-8451 I would like to read and write to the DIO port on the USB-8451 but right now I can only read or write to one DIO line at a time. How do I read and write to the entire port? URL: http://digital.ni.com/public.nsf/allkb/789F3D731F481752862572C700635B52

Error 12 Installing NI-DNET Hardware With an NI-CardBus 8310 Connection I have a PPC-2015 controller that is connected to my PXI chassis through a CardBus 8310. When trying to install my NI-DNET PXI-8461, I get error 12 in the Windows Hardware Installation Wizard. How do I get my PXI-8461 to install and work with my system? URL: http://digital.ni.com/public.nsf/allkb/EF93020C9B89C112862572C30076BD76

Hardware Configuration for Single Wire CAN with a Software Selectable Card I would like to set up the hardware of my software selectable NI-CAN PXI card for single wire transmission. How should I do that? URL: http://digital.ni.com/public.nsf/allkb/CD429CC7E8C45743862572C30000DFF9

The cRIO 985x Interprets Standard Arbitration IDs as Extended Format when I Use Both Formats. If I use an extended CAN arbitration ID (29-bit identifier, ex: 0x20010001) with my program, the cRIO FPGA CAN I/O node receives the correct arbitration ID (ex. 0x20010001). However, if I then use the standard CAN arbitration ID format (11 bit identifier, 0x101) in my program, the cRIO FPGA URL: http://digital.ni.com/public.nsf/allkb/D1F8A60C633CF273862572BA005A7037