Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Configuring My FP-20x0 and cFP-20x0 Using a Computer That Has LabVIEW 8.6 or Later Installed on it I have installed a version of LabVIEW later than 8.5.1 and I would like to use my FP-20x0 or cFP-20x0. In MAX, when I try to install software on my device, all the choices are grayed-out. How can I install an older version of LabVIEW RT? URL: http://digital.ni.com/public.nsf/allkb/68789D8041E494D8862574B000519AC2

test Primary Software: Vision Builder for Automated Inspection Primary Software Version: 1. URL: http://digital.ni.com/public.nsf/allkb/EF104A1F3BDA3FB7862574A90073A7AB

Can the NI 9802 Read or Write SDHC Cards Larger than 2 GB? I am attempting to use the NI 9802 module to access a Secure Digital High Capacity (SDHC) card that is larger than 2 GB, but I am receiving Error 65549. Why am I receiving this error? URL: http://digital.ni.com/public.nsf/allkb/960688A51EF254E78625749E007281DC

How Do I Add FieldPoint I/O Modules to an Existing Project? I have been developing a project in LabVIEW using FieldPoint, and I would like to add additional I/O modules to my hardware set up. How do I get these modules to appear in the Project Explorer window? URL: http://digital.ni.com/public.nsf/allkb/823ABB6F46415BCF862574790070F647

What are the pinouts for the cFP-CB-11? I am trying to find the pinouts for the cFP-CB-11. Where can I find this information? URL: http://digital.ni.com/public.nsf/allkb/2DA50514A6ADD94686257465005C0813

What Operating System is my Real-Time Controller Running and Why? What operating system is my real-time controller running, and why are there different Real-Time Operating Systems on different hardware targets? URL: http://digital.ni.com/public.nsf/allkb/D85F9139AEB88F188625745700569E8D

First Fieldpoint Read VI Causes Execution to Stop I am reading the a bank in my 1808 from my [c]FP-2xxx controller, but if I try to read it with FP Read VI when it is offline I don’t get an error and my execution aborts. URL: http://digital.ni.com/public.nsf/allkb/D3677F958F632BF0862574420059CCEE

Which IAK File Does LabVIEW Use to Get Information Regarding My FieldPoint Configuration? How do I know which IAK file is being accessed in LabVIEW when communicating with my FieldPoint hardware? URL: http://digital.ni.com/public.nsf/allkb/F1362AF9CB23BD16862574420066F426

How does Real-Time Hardware Update Its System Clock? How and when does my Real-Time hardware (cFP, cRIO, or PXI) update its system clock? URL: http://digital.ni.com/public.nsf/allkb/9DCFB7C0EB06CA9786257440006182E2

What is the Correct File Path Format for LabVIEW Real-Time Targets? I am trying to save a file on my real-time target and need to know what directory to specify for saving the file. What directory do I save the file on to make sure it is saved on the real-time target? URL: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF