Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Legacy Board Resource Failures and Conflicts in Windows 2000 Why do I get a 'Board is not responding' error when I try to use my Legacy DAQ device in Windows 2000? URL: http://digital.ni.com/public.nsf/allkb/5289C6C300F2F65B8625718C0070AF2A

Troubleshooting Parallel Port Device Installations What can I do to troubleshoot the installation of my legacy parallel port DAQPad? URL: http://digital.ni.com/public.nsf/allkb/48A017B9F6DF892286257180005BC3EE

How to Control Counter Direction After Upgrading from E Series to M Series If you have a VI written for an E Series board, then replace your board with an M Series, your counter will not be able to detect the count direction. URL: http://digital.ni.com/public.nsf/allkb/B98ADF5C6A38E7F98625714800502D2D

Time Drift With Synchronized DAQ-CAN Application I am trying to synchronize my CAN device to my DAQ device. However, after using an example program to synchronize them together I notice a time drift in DAQ-CAN application. What is causing the time drift and how can I correct this behavior? URL: http://digital.ni.com/public.nsf/allkb/B846715D4A0586BE86257115005A4AA9

Application Developed with an E-Series DAQ Device gives Error -10007 when running with DAQCard-700 Why do I get Error -10007 when running an application with my DAQCard-700? The same program works fine with an E-Series DAQ device. URL: http://digital.ni.com/public.nsf/allkb/E766EBB1BF270BEE48256F7E006D2E58

Easy Way to Test if My DAQCard 700 is Working Properly I have a DAQCard 700, and I am not sure if it is working properly. What is an easy way to test it? URL: http://digital.ni.com/public.nsf/allkb/CF5D4B1F6C263A2C86256F7A00736B65

What Are Acceptable Values for Initial Delay for a Counter Generated Pulse? What values can be used for the initial delay for my counter generated pulse? URL: http://digital.ni.com/public.nsf/allkb/2BED59AA6323070F86256F78007506D7

Parallel Port Does Not Appear in Measurement and Automation Explorer I am setting up my parallel port device (DAQPad-MIO-16XE-50, DAQPad 1200, or SCXI 1200) in Measurement and Automation Explorer (MAX), but when I try to choose a port all I can select is Not Assigned. I can see that my parallel port is enabled in Device Manager. How can I make URL: http://digital.ni.com/public.nsf/allkb/31DC65938A666A9A86256F56005B2624

Lab-PC+ Not Responding to Selected Base Address When I perform Test Resources on my Lab-PC+ in the Measurement and Automation Explorer, I receive the error 'This device is not responding to selected base address.' I have tried setting the dip switches for several different unused base addresses, tried the board in different slots, and another URL: http://digital.ni.com/public.nsf/allkb/34CE5C42FD8E520186256F4A0051BDA8

How Do I Install a Legacy ISA DAQ Device in Windows XP or 2000? Legacy, non-plug-and-play, ISA DAQ boards such as the NI PC-DIO-96 do not show up in MAX or Device Manager. URL: http://digital.ni.com/public.nsf/allkb/6CDE49FD4B047A7486256F3B0064C530