Transferring Vision Builder AI Inspections To or From a CVS
I created a Vision Builder for Automated Inspection (VBAI) script on a Windows based PC. Now, I would like to upload this VBAI script to my Compact Vision System (CVS). I tried making a directory on my CVS to transfer my VBAI script via the File Transfer Protocol (FTP), but when I target the
URL: http://digital.ni.com/public.nsf/allkb/35A8C01DB7CB8CD48625732700153E2B
|
Why can I see my CVS in MAX but not in LabVIEW 8.0?
I installed NI-IMAQdx and/or NI-IMAQ for IEEE 1394 cameras on my host computer. When I connect my CVS to the network, I can see it in MAX after refreshing. However, if I open LabVIEW and try to create a target, the option for searching for CVS units does not appear. How can I connect to my CVS from
URL: http://digital.ni.com/public.nsf/allkb/6354A02D073C4EB38625730500504D1F
|
Drive a Control Line High or Low in the Camera File
I have an NI Frame Grabber, like the PCI-1422, and I am making my own camera file. I would like to know how to toggle the polarity of the control lines on my image acquisition board. I do not want to just toggle the line or send a pulse, but rather set it high or low. How can I drive my
URL: http://digital.ni.com/public.nsf/allkb/4E6F9A0BDAE9BFDB862572D80053DFB7
|
Programmatically Resetting the CVS-145x
Problem: Can I reset my CVS-145x through software programmatically? Solution: No, there is no way to programmatically reset a CVS-145x. The closest option available is the Shutdown feature of the CVS.
URL: http://digital.ni.com/public.nsf/allkb/DA1DA0265BC5EC55862572D60050085E
|
My Reformatted CVS is No Longer Found in My Remote Devices in MAX
I reformatted my Compact Vision System (CVS) and now I can no longer find it under Remote Devices in Measurement and Automation Explorer (MAX). What do I do?
URL: http://digital.ni.com/public.nsf/allkb/5B4E34342F0001FC862572D5001FA09F
|
Asynchronous Reset Mode With Pulnix TM-9701 Progressive Scan Camera
How do I setup my Pulnix TM-9701 to operate in Asynchronous Reset Mode?
URL: http://digital.ni.com/public.nsf/allkb/DBA3EB2EBB5041D5862572D0000C0D28
|
Choosing the Right PC for the NI PCIe-1427
There are several desktop computers and motherboards with PCIe slots in the market. Which ones has National Instruments tested and recommend for use with the NI PCIe-1427?
URL: http://digital.ni.com/public.nsf/allkb/915E283F71A868AE862572BA006807B5
|
IMAQ Error -1074397151 When Changing an Analog Attribute During a Grab
I have an analog NI-IMAQ frame grabber that I am acquiring images from in LabVIEW, and I would like to change an Analog Attribute while grabbing my images. For example I would like to be able to change my White Reference Voltage while acquiring my images so that I can adjust the reference
URL: http://digital.ni.com/public.nsf/allkb/00B08A85411BD0E7862572A00077DDCD
|
Where Can I Find The Warranty For My NI Hardware?
I'm trying to find the warranty information for my NI hardware. Where can I find it?
URL: http://digital.ni.com/public.nsf/allkb/8341879DC763DF5886257289005D816E
|
Black Reference Voltage Level of the PCI-1405 and NI-1411
Previously, I had a PCI-1407 and in the Measurement and Automation Explorer (MAX) I was able to set both the white and black reference voltage levels. I have since purchased a PCI-1405 and a PCI-1411, but only the white reference level appears in MAX. What is the black reference level set to
URL: http://digital.ni.com/public.nsf/allkb/5580B1E1906F18C486257287001E7B18
|
