Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Calibration Executive NI 5600 Read Data File Missing I am using Calibration Executive to calibrate a NI 5600. During the calibration process a error message is received:Calibration Procedure ErrorOpen File in CalExec_5600_Read Data.VILabVIEW: File not found. The file might URL: http://digital.ni.com/public.nsf/allkb/2F29C0AEA6BF33C8862573D3006E5197

Calibration Executive is giving Error -1074001424 When Calibrating a PCMCIA-4050 Why am I receiving error -1074001424 trying to calibrate my PCMCIA-4050 with Calibration Executive? URL: http://digital.ni.com/public.nsf/allkb/4D4E9D5DE63C562D862573BE005D98CC

Calibration Executive Report Shows Failure for NI 4060 when Software Indicates Passing When I run a "verify only" on a 4060 it will show as a green PASS but in the report, it does not meet the "as Left" data (which are 24hr specifications) and thus will show FAILED. URL: http://digital.ni.com/public.nsf/allkb/F099D251EAFA73DE862573AE000A6F1C

Error 1074118637 in Calibration Executive when Calibrating a DMM The error below is occuring in Calibration Executive when trying to calibrate a DMM from National Instruments: Error -1074118637 occurred at niDMM Read.vi at step Re-verify ACVoltage Possible reason(s): There is an error in the URL: http://digital.ni.com/public.nsf/allkb/46F62B301745498C8625730200754A14

PXI-4072 Failing Calibration in Calibration Executive 3.2.1 When performing a calibration of a PXI-4072 in Calibration Executive 3.2.1 my calibration always fails. Why does the failure always occur during the Capacitance Verification step? URL: http://digital.ni.com/public.nsf/allkb/5C047112BCD6B10E862572D000441A1F

Error -200152 after running my PXI-4472 through Calibration Executive After performing a calibration through Calibration Executive 3.1.2, my PXI-4472 always returns Error -200152: Data read from the EEPROM on the device is invalid. whenever I try to use the device. This occurs in my application and in MAX through Test Panels. Why URL: http://digital.ni.com/public.nsf/allkb/CD5822581645D90C862572BC005EA7B2

Only Even Channels Can Calibrate On My 1120/1120D Module When attempting to calibrate an 1120/1120D module in CalExec, I cannot get the odd numbered channels to calibrate. What could be wrong? URL: http://digital.ni.com/public.nsf/allkb/358AA79D3BEAADD6862572BC00752DF5

Error -17208 When Using SCXI-1104 with Calibration Executive 3.2 Error -17208 is returned when calibrating an SCXI-1104 with Calibration Executive 3.2. URL: http://digital.ni.com/public.nsf/allkb/2FC4059D33FEF318862572BB0043704C

Error -200077 When Using an NI 9263 with Calibration Executive 3.2 When I attempt to calibrate an NI 9263 (cRIO/cDAQ module) with Calibration Executive 3.2, I'm presented with error -200077. URL: http://digital.ni.com/public.nsf/allkb/F979EC662795C43C862572B80081D469

Can I Use the BNC-2111 for Calibration of a 671x/672x/673x Device? I would like calibrate my 671x/672x/673x device and I have a BNC-2111. The manual states I need a CB-68. URL: http://digital.ni.com/public.nsf/allkb/BD69B93090555F56862572AB0056E7F8