How Do I Remove Disconnected Hardware Names from My Remote Systems in MAX?
I have connected numerous hardware devices running a Real-Time operating system to my computer. Now that they're disconnected, I still have their names or IP addresses listed under Remote Systems in the Measurement and Automation Explorer (MAX). How can I remove all of them at once?
URL: http://digital.ni.com/public.nsf/allkb/3AC0CFA6BDE0F0F0862574B40000EE53
|
Why Can I Not See All of My IMAQdx Camera's Attributes in Measurement & Automation Explorer
I know my 1394/Gigabit Ethernet camera has more attributes then I can see in Measurement & Automation Explorer (MAX). How do I get access to the attributes I can not see?
URL: http://digital.ni.com/public.nsf/allkb/9FA7FEE4FC51F043862574A30075B7A1
|
Why Does NI Service Locator Not Start?
When I try to open the NI Example Finder I receive an error that the NI Service Locator is not running. I tried to manually start the NI Service Locator by opening up the Windows Services window , but as soon as I press start the NI Service Locator it immediately stops again or I receive a
URL: http://digital.ni.com/public.nsf/allkb/2F55B93405ED07AA862574A300826580
|
Unable to Change Properties in Vista Due to Lack of Administrative Controls
When I try to change some properties in Windows Vista, for example GPIB in Measurement & Automation Explorer, the properties are grayed out and I get a message that the options are not available due to a lack of administrative control.
URL: http://digital.ni.com/public.nsf/allkb/E2D2D281BCBFC616862574A2005FAC62
|
Why Do I Get an Error in MAX When Exporting or Importing NI-Serial or NI-VISA Settings From a Target Using a Windows Vista 64-bit Host?
I am using a host computer with Windows Vista 64-bit, and when I try to export or import NI-Serial or NI-VISA device configuration from my remote target in MAX, I get the following error message.
URL: http://digital.ni.com/public.nsf/allkb/BB76E198894E95148625747400591D3E
|
Why Do I Get Error -1074118644 Using an NI Switch?
When I configure an NI switch I get the following error: Error -1074118644 occured at niSwitch Initialized With Topology.viNo legacy device
URL: http://digital.ni.com/public.nsf/allkb/8BAC537C339309C58625746E00703C08
|
Why Do I Get an Error in MAX After Downgrading From LabVIEW Real-Time 8.6 to 8.5?
After downgrading from LabVIEW Real-Time 8.6 and Network Variable Engine 1.5.0 to LabVIEW Real-Time 8.5 and Network Variable Engine 1.4.0, I get one of the following messages in Measurement & Automation Explorer (MAX) when I try to expand Remote Systems >>
URL: http://digital.ni.com/public.nsf/allkb/679050D7A24AAF448625746D004FE902
|
Why is 100 mA the Maximum Current Limit for the PXI-4130 in the NI-DCPower Soft Front Panel?
I'm using the NI-DCPower Soft Front Panel (SFP) to output DC Voltage on a PXI-4130. On Channel 1 the SFP does not let me set the current limit above 100mA. This is well below the maximum current of the PXI-4130.
URL: http://digital.ni.com/public.nsf/allkb/A522D546F879426F8625746C006D0D78
|
How to Set Input Range When I Use an SCXI 1120 with a TBX 1327 Terminal Block
I have an SCXI 1120 module, and I want to acquire signal whose range is greater than 5 V. That's why I'm using a terminal block (a TBX 1327), but I don't know how to configure gain and attenuation.
URL: http://digital.ni.com/public.nsf/allkb/32802A102D2D5D238625746600471DFA
|
How Do I Use LabVIEW DSC With a CTI 2500-c200 PLC?
I have a PLC from Control Technology, Inc. How do I interface with it using LabVIEW DSC?
URL: http://digital.ni.com/public.nsf/allkb/42AD79C8D51D53A0862574640066650E
|
