Why is 100 mA the Maximum Current Limit for the PXI-4130 in the NI-DCPower Soft Front Panel?
I'm using the NI-DCPower Soft Front Panel (SFP) to output DC Voltage on a PXI-4130. On Channel 1 the SFP does not let me set the current limit above 100mA. This is well below the maximum current of the PXI-4130.
URL: http://digital.ni.com/public.nsf/allkb/A522D546F879426F8625746C006D0D78
|
NI-488.2 2.4 Driver Installation Fails on Mac OS X
I am installing the NI-488.2 driver version 2.4 on Mac OS X, but the I receive an error near the end of the installation.There were errors installing the softwarePlease try installing again.
URL: http://digital.ni.com/public.nsf/allkb/6DDEEE1D00B7E1CC8625746B007C31B1
|
Why Can't I Run My R Series Analog Output Channels at the Maximum Update Rate on NI-RIO 2.4.0 or later?
Since NI-RIO 2.4.0, the analog output channels on my R Series card will not achieve the maximum update rate. Why is this?
URL: http://digital.ni.com/public.nsf/allkb/37CDA31BE7E90BEC8625746A0068D0D7
|
Why do I get Error -1074118136 which references DAQmx Error -88709 when I run my RF application?
When I use triggering in my RF application I get Error -1074118136. The error message references DAQmx Error -88709: The specified operation cannot be performed because a task has been aborted or a
URL: http://digital.ni.com/public.nsf/allkb/ABB3C241E7955AB58625746A00689F33
|
Why Do I Get Error -50204 When I Initialize a Scope Session?
I have installed NI-SCOPE 2.5 or 2.6 and then upgraded NI-DAQmx to version 8.5. When I initialize a Scope session, the following error is returned: "niPAL error -50204 occurred: The specified file could not be opened. The operation could not be
URL: http://digital.ni.com/public.nsf/allkb/F317DE5F2B34CFC58625745D007D47C7
|
Why are my recommended software sets broken after I installed NI-FieldPoint 6.0.1?
I upgraded to NI-FieldPoint 6.0.1 or LabVIEW 8.5.1. Now when I try to install software on my Real-Time FieldPoint controller, my recommended software sets for LabVIEW 8.5 are greyed out. How do I fix this?
URL: http://digital.ni.com/public.nsf/allkb/2349FC51930C96A28625745D00703C1C
|
My ELVIS DMM in Multisim Has AC Measurements Disabled
I'm using the NI-ELVISmx instruments inside Multisim and I want to measure AC signals from my simulated circuit, I'm selecting the NI-ELVISmx DMM but I can't seem to choose any of the AC options, only DC measurements are enabled.
URL: http://digital.ni.com/public.nsf/allkb/D9EB9DE6688E1EAA86257455007478B3
|
List of Bug Fixes for NI-RIO 2.4.1
The following items are the IDs and titles of a subset of issues fixed between NI-RIO 2.4.1. If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of NI-RIO.
URL: http://digital.ni.com/public.nsf/allkb/75A41043B20ACB0B862574490051DCED
|
Lighting Options Do Not Show for Smart Camera
When configuring a light for my Smart Camera in Measurement & Automation Explorer or Vision Builder AI, why are there no options available under the Select Light section?
URL: http://digital.ni.com/public.nsf/allkb/79BAE38B8B8650018625744800763FEB
|
Error 200284 on Continuous Buffered Counting Using an Analog Clock Source
I am trying to do buffered counting using my on board analog sample clock as my clock source. My counter latches counts for a while but it freezes and then I get error 200284 – Measurements: Some or all of the samples requested have not yet
URL: http://digital.ni.com/public.nsf/allkb/925877EA89CDD5F08625744700533BA8
|
