Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

No Overlays for Custom Steps in Vision Builder AI I designed a custom VBAI step using the SDK. I'm trying to set up my inspection overlay by clicking the Setup Overlay button in the State Configuration Window (where the steps in a state are displayed), but the options for my custom step are grayed out. Why? URL: http://digital.ni.com/public.nsf/allkb/ECBA546FC26E35FF862571BC00752068

Digits of Precision in Vision Builder for Automated Inspection Any numerical measurements in Vision Builder for AI are displayed with only two digits of precision. Does Vision Builder for AI offer more than two digits of precision? If so, how can I display more than two digits of precision? URL: http://digital.ni.com/public.nsf/allkb/15F365C8795279A1862571B900651366

Selecting an Image to Display on the VGA Port from VBAI on the CVS When working with the Compact Vision System (CVS) and Vision Builder for Automated Inspection (VBAI) I acquired images from multiple cameras during my inspection. How do I control which image is output on the VGA output connector on the CVS from VBAI? URL: http://digital.ni.com/public.nsf/allkb/896797263BFE78F38625716A000C1D3C

Configuring a LabVIEW 8 Compact Vision System for Vision Builder AI 2.6.1 I have a Compact Vision System (CVS) that is currently configured to run LabVIEW Real-Time 8.0, but I would like it to work with Vision Builder AI (VBAI) 2.6.1. What is the fastest way to update the CVS with the proper software to work with VBAI 2.6.1? URL: http://digital.ni.com/public.nsf/allkb/BD6EE2DD140C0B3486257141007B35EF

How Do I Make My VBAI Inspection Run At Startup On My CVS? I have created an inspection in Vision Builder for Automated Inspection (VBAI) and would like to deploy my inspection to a Compact Vision System (CVS) to run at startup. How do I set the inspection to run at startup? URL: http://digital.ni.com/public.nsf/allkb/F79D691691FE564A86257141007A1B93

Calling Vision Assistant from Vision Builder for Automated Inspection I have Vision Builder for Automated Inspection (VBAI) 2.0 installed on my computer. I recently upgraded my Vision Development Module from Version 7.0 to Version 8.0. When I use the open Vision Assistant step from VBAI it still opens Vision Assistant 7.0 instead of 8.0. How can I make it open the URL: http://digital.ni.com/public.nsf/allkb/4D8B0D26E85A56BC8625710000597CF4

Migrating VBAI 2.6.1 Script to LabVIEW Generates VI that Will Not Execute Properly I have Vision Builder for Automated Inspection (VBAI) version 2.6.1 and I have LabVIEW 7.0 and Vision 7.1. I have created a VBAI inspection and now I would like to generate LabVIEW code from my inspection. The code migration completes without any errors or warnings, but when I open up the URL: http://digital.ni.com/public.nsf/allkb/EDF96133CB1D3B6F862570FA004F3BD0

What Versions of Vision Builder for Automated Inspection and LabVIEW RT Can I Have on a CVS or Smart Camera at the Same Time? Which versions of Vision Builder for Automated Inspection (VBAI) and LabVIEW Real-Time will work together on a Compact Vision System (CVS) or Smart Camera? URL: http://digital.ni.com/public.nsf/allkb/01C1CC3AF27EEB35862570F8007139AF

Format 7 Mode in VBAI Causes 'Not enough memory' Error on CVS. Why do I get an error saying 'Not enough memory' when I switch my 1349 camera to Format 7 Mode in my Vision Builder for Automated Inspection (VBAI) acquire step on my CVS? URL: http://digital.ni.com/public.nsf/allkb/6857D5070BA5BFCE862570B40077D920

Switching 1394 Camera to Format 7 Mode in VBAI Acquire Step Causes 'Not Enough Memory' Error on CVS. Why do I get an error saying 'Not enough memory' when I switch my 1394 camera to Format 7 Mode in my VBAI acquire step on my CVS? URL: http://digital.ni.com/public.nsf/allkb/0E5C477D8F114685862570B5000406C6