Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Can't I See My CAD Drawing in the NI Motion Assistant? I use the CAD Move in NI Motion Assistant to import a CAD drawing into my script. The file imports properly but I dont see my drawing in either the 2D or the 3D Position View. Why does this happen and how can I fix this? URL: http://digital.ni.com/public.nsf/allkb/7461BD21782BEA3686257413007859C9

Using Fixed-Point Data with CompactRIO and LabVIEW FPGA In versions of NI-RIO prior to 2.4, C Series Modules only return binary (uncalibrated) data, which requires the host VI to apply calibration coefficients and convert the data to engineering units in software. After installing NI-RIO 2.4 or later, the default behavior for AI/AO modules is to URL: http://digital.ni.com/public.nsf/allkb/0294B7F0E28501B2862574470076D330

NI Motion Assistant Release Notes Problem: Where can I find the NI Motion Assistant Release Notes? Solution: Use the following links to access previous Release Notes for NI Motion Assistant, starting with NI Motion Assistant 1.3. Related Links: NI Motion Assistant 1.3 Release Notes NI Motion Assistant 2. URL: http://digital.ni.com/public.nsf/allkb/66C74356F9735DEF862572A0000F4A7D

'NI Motion Template Not Found' Error When Generating LabVIEW Code I tried to generate LabVIEW code in the Motion Assistant and I get an error saying NI Motion template not found. How can I correct this error? URL: http://digital.ni.com/public.nsf/allkb/0219B4393FA1B8648625728B008251CC

Can I Use the NI Motion Assistant with LabVIEW 8.0? I would like to generate code for LabVIEW 8.0 using the NI Motion Assistant version 1.3. When I install the NI Motion Assistant, there seems to be support for LabVIEW 7.x. Can I uses the Motion Assistant with LabVIEW 8.0? URL: http://digital.ni.com/public.nsf/allkb/A6E69AB4AF4AA444862570B200758420

Using Motion Assistant 1.x Code Generation with the PCI-7390 When adding digital output to your steps in the NI Motion Assistant, the code generation uses the wrong port ID values. URL: http://digital.ni.com/public.nsf/allkb/20AEE4EA029F4CED862570AF00042D50

Virtual Motion Boards and Motion Assistant Why am I unable to run a script in Motion Assistant when referencing a virtual board in MAX? URL: http://digital.ni.com/public.nsf/allkb/B8C8B4866CD33E7B86256FA50003B933

After Installing Motion Assistant 1.2 or the Driver CD My 73xx NI-Motion Board(s) No Longer Install I have recently installed drivers from either the Motion Assistant 1.2 installer or the November 2004 Driver CD. Though my motion controller board previously worked, it no longer functions. Why is this? URL: http://digital.ni.com/public.nsf/allkb/B62DBD669A7B3AF586256F88005C39DA

Troubleshooting the Licensing and Activation of Motion Assistant I recently installed Motion Assistant 1.2 on a new computer and am having problems with the licensing and activation of this software. Whenever I attempt to apply an activation code, one generated through the internet or by calling technical support, I receive an error saying that my code is not URL: http://digital.ni.com/public.nsf/allkb/6B8808084326980886256F7F007D6D1F

Why Is My PCI-7344 Not Recognized After I Install Motion Assistant 1.2? I have NI-Motion 6.1.5 installed (recently installed latest update) and a PCI-7344. Everything was working fine, then I installed Motion Assistant 1.2. The device now doesn't show up in Measurement and Automation Explorer (MAX) and it shows up as an 'Unknown Device' in Windows Device Manager. What URL: http://digital.ni.com/public.nsf/allkb/4C03B2CA2306D24486256F6A007FE772