Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Switch Executive Error -1074118655 in TestStand Application I'm building an application using the switching capabilities in TestStand, but have gotten to a point where I need to do several steps in between switching and have decided to build a VI in LabVIEW that I will call from TestStand. However, when I insert the LabVIEW VI as an action in my sequence URL: http://digital.ni.com/public.nsf/allkb/D7D3B09DE41F104986256F34006FF217

IVI-C Class Driver Support for IVI-COM Specific Drivers How can I use IVI-C and IVI-COM specific drivers interchangeably in the same application? Can I use IVI-COM specific drivers with NI TestStand, NI Switch Executive, or the IVI Class Drivers in LabVIEW and CVI? URL: http://digital.ni.com/public.nsf/allkb/5499F9DBD07522F686256F260066BA86

Meaning of the Routing Usage Column in Switch Executive Reports While looking through my Switch Executive report, I noticed a column called 'Routing Usage' which has one letter values for some of my channels. What do these values mean? URL: http://digital.ni.com/public.nsf/allkb/2DF17A2CD2E06CEE86256F0F007D6A17

Using SCXI-1127/1128/1129 with NI-SWITCH 1.6.1 or earlier and NI Switch Executive 2.0 If you have NI-SWITCH 1.6.1 or earlier installed, when you add SCXI-1127-1128/1129 to an NISE 2.0 virtual device you will get an error. URL: http://digital.ni.com/public.nsf/allkb/76EC4442BBFC0BCE86256ED8006CD06E

Can Switch Executive Connect One Row of a 2-Wire Matrix to Two Different Channels of a 1-Wire Switch? If you have a SPST relay in front of the rows or colums of a 2-wire Matrix, can Switch Executive handle the conncetions directly from the channels of the SPST switch module to the 2 wire Matrix (i.e, ch0 of SwitchA connected to row0+ of SwitchB, and ch1 of SwitchA connected to row0- of SwitchB) URL: http://digital.ni.com/public.nsf/allkb/69B51F0F4875567686256E1D007ECF95

Changing the Logical Name of a Switch in an NI Switch Executive Configuration I would like to change the logical name of a switch in my NI Switch Executive configuration but have been unable to figure out how to do so. If I add a switch to a NI Switch Executive configuration and subsequently change the logical name of the switch in the IVI configuration, this will URL: http://digital.ni.com/public.nsf/allkb/EA91928CD860B80886256DFD0072EA28

How Do I Deploy My Switch Executive Configuration to Target Systems? I have an application that uses NI Switch Executive. I have several target systems in the field that I would like to deploy my NI Switch Executive configuration to. How can I deploy my NI Switch Executive configuration to my target systems? URL: http://digital.ni.com/public.nsf/allkb/836390E0A691E1B786256DDD00780A85

Error 'invalid device' in Switch Executive Why am I getting 'invalid device' in Switch Executive when my IVI logical name exists and the device is configured correctly? URL: http://digital.ni.com/public.nsf/allkb/6AB21F3BC4BBDD7886256D7400581DD5

Order of Installation for Multiple National Instruments Hardware and Software Products I have just purchased multiple National Instruments hardware and software products. Is there a preference for the order of installation of National Instruments software and hardware? URL: http://digital.ni.com/public.nsf/allkb/779E54A45478FA2C86256D0500774FCB

Why Do I Get a Parsing Error after Adding a New Switch in Switch Executive? I'm trying to add a new switch to Switch Executive and I keep getting error BFFF0012 which is a parsing error. After creating the IVI instrument, I can successfully add the switch and see all the correct channels, but as soon as I click on the 'Routes' tab, I receive the error. What is happening? URL: http://digital.ni.com/public.nsf/allkb/98DCBD20DFCA4B9F86256CEC004ADEE2