Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Error -1074135024 In Calibration Executive Procedure For Agilent 3325B I get Error Code -1074135024 in Calibration Executive when I'm running the procedure for the NI 4472 DSA device. At the step regarding the Agilent 3325, it gives the error message shown below. URL: http://digital.ni.com/public.nsf/allkb/E03677C1B01816ED86256EED0065D27A

Run-Time Configuration of IVI Instrument Drivers Is there an API for run-time configuration of IVI drivers? I would like to programmatically configure IVI drivers under MAX with a CVI application. URL: http://digital.ni.com/public.nsf/allkb/F25F9B0E8DA4BB2386256DEF00729F81

Creating the IVI-Compliant Specific Driver Installer I have developed an IVI specific driver, and now I would like to create an IVI-compliant installer for it so that the software module information shows up in MAX (Measurement and Automation Explorer). URL: http://digital.ni.com/public.nsf/allkb/6F8D1A6D5428C77A86256DC000709710

Why Does the IviClass _Close Function Not Return the User Defined Simulation Code? Why does the IviClass _Close function not return the user defined simulation code? URL: http://digital.ni.com/public.nsf/allkb/D1811C62E72C61F886256DC0006EA095

Are IVI Drivers Supported on Non-Windows Operating Systems? I am using LabVIEW and a GPIB device on a non-Windows operating system to communicate with a GPIB instrument. I found an IVI Driver for my instrument on the National Instruments Instrument Driver Network. Are IVI Drivers compatible with non-Windows operating systems? URL: http://digital.ni.com/public.nsf/allkb/CCA4B8A689D1B2E186256D9B00739F81

How Can I Set the GPIB Timeout When Using an IVI Driver? I am using an IVI driver. With VISA, I could set the timeout value for GPIB communication. There does not appear to be a way to set the timeout value when using an IVI driver. URL: http://digital.ni.com/public.nsf/allkb/4556968492A0770F86256D49007D5E4F

MAX Cannot Deserialize the IviConfigurationStore.xml Because the XML Schema File (IviConfigurationStore.xsd) Is Not Found. I receive the following error message when I expand the IVI Drivers category in MAX: The provider was unable to deserialize the file: C:\Program Files\IVI\Data\IviConfigurationStore.xmlDeserialize failed. Cannot find the XML Schema file: C:\Program URL: http://digital.ni.com/public.nsf/allkb/C4AE3AB7DA4D689086256D4900621D2E

2711 installation error when installing Measurement Studio 6.0 after installing NI-Switch 1.6.1 and IVI Compliance Package 2.0 If you install the following products in the order specified bellow: NI-SWITCH 1.6.1 and previous IVI Compliance Package 2.0 Measurement Studio 6.0you might encounter error message Error 2711 about the IVI MAX provider during URL: http://digital.ni.com/public.nsf/allkb/79E90A70CF7E7B3786256D180059EBC9

Default Setup Changes In The IVI Configuration Utility In MAX 3.0 I used to be able to specify the default setup data for my IVI driver in the Measurement and Automation Explorer (MAX). After installing MAX 3.0 and IVI Compliance Package from the Driver CD, I no longer have this option. URL: http://digital.ni.com/public.nsf/allkb/72F3656387DEAEFA86256D180062862C

Guidelines On How To Upgrade From The IVI Engine (Non-Compliance) Package To IVI Compliance Package 2.0 I have previously installed the IVI Engine (Non-Compliance) Package (from either DriverCD, Modular Instruments' installers, or web) because my system did not meet the minimum system requirements of Internet Explorer 4.0.1. This alternate package does not include IVI Shared Components, configuration URL: http://digital.ni.com/public.nsf/allkb/1EED131F39DD8F2286256D18006E14F1