Motion Breakpoints used as Triggers for Finite Retriggerable Analog DAQ Acquisition
Print
This VI performs a single straight line move on one axis and samples data from the specified DAQ board at specified intervals based on the breakpoint period. The DAQ board and Motion board must be connected with a RTSI bus or PXI Backplane. The DAQ board collects the data in External Sample Clock mode and uses a retriggerable counter operation to send a finite pulse train triggered by a RTSI line to act as the Sample Clock.
Filename: 25229.vi
Application Software: LabVIEW Base Development System 7.1
Language(s): LabVIEW
Hardware Group: Multifunction DAQ (MIO), Motion Control
Hardware Model: PCI-6220, PCI-7350
Driver: NI-DAQmx 7.4, NI-Motion 6.1.2
Requirements
Filename: 25229.vi
Software Requirements
Application Software: LabVIEW Base Development System 7.1
Language(s): LabVIEW
Hardware Requirements
Hardware Group: Multifunction DAQ (MIO), Motion Control
Hardware Model: PCI-6220, PCI-7350
Driver: NI-DAQmx 7.4, NI-Motion 6.1.2
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).