What Are The Different Ways to Set My Pulse Timing Parameters in NI-DAQmx?
Print
This example demonstrates how to generate a continuous digital pulse train from a Counter Output Channel. The Pulse Timing Parameters are configurable.
This example shows how to configure the pulse in terms of Frequency / Duty Cycle, High Time / Low Time, or High Ticks / Low Ticks.
Filename: 203699.vi
Application Software: LabVIEW Full Development System 7.0
Language(s): LabVIEW
Hardware Group: Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy) 7.0
This example shows how to configure the pulse in terms of Frequency / Duty Cycle, High Time / Low Time, or High Ticks / Low Ticks.
Requirements
Filename: 203699.vi
Software Requirements
Application Software: LabVIEW Full Development System 7.0
Language(s): LabVIEW
Hardware Requirements
Hardware Group: Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy) 7.0
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).