Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Subscribe

Add to Del.icio.us

DIGG this!


Feedback


Yes No

Related Categories

Products

Development Topic

Related Links - Developer Zone

Related Links - Products and Services

Manually Exporting Timing Signals from a DSA Device

0 ratings | 0.00 out of 5
Print

Downloads

Filename: dsa_export_timing_signal.vi
Requirements: View

This example demonstrates how to manually export timing signals such as the sample clock, sample clock timebase, and start and reference triggers so that other devices can use them. The example also performs a continuous analog input acquisition and is written using DAQmx.

Note: The sample clock timebase can only be routed to the PXI_Star lines and the DSA board must be in slot 2 of a PXI chassis in order to export it.

Requirements


Filename: dsa_export_timing_signal.vi

Software Requirements


Application Software: LabVIEW Base Development System 7.1
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Dynamic Signal Analyzers (DSA)
Hardware Model: PCI-4472, PCI-4474, PXI-4472B, PXI-4462, PXI-4472, PXI-4461
Driver: NI-DAQmx 7.3

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).