Pulse Width Modulator with NI-TIO Devices
PrintDownloads
Filename: 201094.llb
Requirements: View
Though this example is written specifically for devices with NI-TIO counter/timer application-specific integrated circuit (ASIC), it can be modified to use with the DAQ-STC ASIC. To modify this program to be used with the DAQ-STC, replace Counter Gate (NI-TIO).vi in the diagram with Counter Gate (NI-STC).vi, which can be found in the example directory: ...\examples\daq\counter\daq-stc.llb\Counter Gate (STC).vi
Counter Control.vi with switch cycle control code is used to change the pulse specification on the fly. This example purposely ignores error -10880, which can occur if the output pulse specification changes too fast.
Requirements
Filename: 201094.llb
Software Requirements
Application Software: LabVIEW Full Development System 6.1
Language(s): LabVIEW
Hardware Requirements
Hardware Group: Counter/Timers (TIO)
Hardware Model: PCI-6602, PXI-6602, PCI-6601, PXI-6608, DAQCard-6601, PCI-6608, PXI-6601, PXI-5660
Driver: Traditional NI-DAQ (Legacy) 6.9.3
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).