|
Developing Test Systems for Automotive Multimedia Devices Using NI TestStand and PXI Hardware
Developing a test system for automotive multimedia systems that can perform multiple test operations for both DVD players and the associated display unity, and be easily altered to meet changing test parameters.
|
|
大華技術學院運用NI-DAQ 開發超音波輔助追頻系統
當超音波振動頭於加工時，因外在因素之影響，其共振頻率容易產生漂移的現象。因此必須隨時對超音波輔助加工系統的振動頻率做一追蹤與補償，以確保超音波輔助加工於共振頻率下，方可獲致最佳的加工品質與效率。
|
|
Developing a Strain Measurement Solution Using NI LabVIEW Software and Data Acquisition Hardware
Developing a high-speed strain gage measurement system for testing computer printed circuit boards (PCBs), motherboards, and mobile phones.
|
|
G Systems 自動化測試公司使用 PXI 架構的 RF 與 GPS 共核生產測試作業
針對 3.5 GHz 天線傳輸器 (Subassembly) 與 GPS 追蹤模組 (Top assembly)，進行生產測試作業的自動化，並為海外製造廠最大化生產輸出的同時，亦要能最小化其整體成本。
|
|
Automated Antenna Testing Using NI LabVIEW Software and PXI Hardware
Replacing existing manual antenna test systems with an automated solution that results in better equipment throughput and more test flexibility.
|
|
ProContROLL – Prozessüberwachung beim Festwalzen
Vorgestellt wird eine in LabVIEW programmierte Software, die beim Festwalzprozess die Prozessgrößen hydraulischer Druck-, Volumen¬strom oder alternative Messgrößen überwacht.
|
|
Système de test en production distribué pour tubes à vide utilisant des contrôleurs d’automatismes programmables et des instruments modulaires
Tester des tubes à vide passifs personnalisés sur neuf stations de test individuelles distribuées et envoyer les données et les résultats des tests à un serveur de base de données centralisé pour analyser les données et les stocker.
|
|
Testing Clutch Drive Plate Production with NI LabVIEW and NI Hardware
Creating an end-of-line test system to provide a traceable quality standard of clutch drive plates for supplying original equipment (OE) parts to the automotive industry.
|
|
Developing an Intelligent, Multisensor Tool Monitoring System for Tool Wear and Breakage Detection
Developing an integrated multisensor data acquisition system for online tool monitoring in vertical milling operations for computer numerical control (CNC) machines.
|
|
Performing On-Wafer Testing with NI LabVIEW, NI TestStand, and PXI
Developing a reliable on-wafer test system for microelectromechanical system (MEMS) devices used for cardiac resynchronization therapy (CRT).
|
