|
DIAdem Accelerates Crash Test Analysis
"After a crash test, we have a fully analyzed test data package within minutes. Before we implemented DIAdem, we sometimes had to wait several hours."
|
|
Using LabVIEW Real-Time and PXI to Enhance a Volvo Car Corporation Student Project
Developing a control system that incorporates continuous changes of several parameters.
|
|
Developing a Dynamic Visuomotor Inspection Task Simulation System with LabVIEW and NI Vision
Developing an accurate, cost-effective simulation system to support a research program that characterizes and studies human visuomotor inspection activities.
|
|
Monitoring the Structural Health of the Rion-Antirion Bridge Using LabVIEW Real-Time
Developing a structural monitoring system to measure and define the behavior of the Rion-Antirion Bridge during normal operation, strong winds, and earthquakes.
|
|
Using NI DIAdem to Develop an Occupant Restraint System
Improving dynamic and static testing procedures for vehicle occupant protection systems.
|
|
Developing the Control Center for a New Green Rocket Propellant Test Bench at the German Aerospace Research Centre
Running a priority unit system and an emergency stop system in a green propellant fuel-testing facility to monitor signals from a nominal test bench control system, and performing all the necessary actions to take the test bench to a safe state in case of signal failure.
|
|
Industrial Machine Vision Based on National Instruments Technology Goes Further in Complex Human Task Automation
Reproducing complex human inspection tasks with multiple visual inspections with a high level of precision (+/- 0.001 inch) and a high level of complexity (defect detection on highly reflective metallic surfaces with complex shapes and validation of pin stamped codes) for various part models and
|
