|
Système de test en production distribué pour tubes à vide utilisant des contrôleurs d’automatismes programmables et des instruments modulaires
Tester des tubes à vide passifs personnalisés sur neuf stations de test individuelles distribuées et envoyer les données et les résultats des tests à un serveur de base de données centralisé pour analyser les données et les stocker.
|
|
Testing Clutch Drive Plate Production with NI LabVIEW and NI Hardware
Creating an end-of-line test system to provide a traceable quality standard of clutch drive plates for supplying original equipment (OE) parts to the automotive industry.
|
|
Echtzeitdiagnose der Radmontage an NFZ mit PAC-Automatisierungssystem Compact FieldPoint senkt Kosten für Nacharbeit
Beispiel für die Integration und Erweiterung eines Diagnosesystems für Prüfprozesse anhand einer Schraubsteuerung für die Radmontage in der Automobilindustrie
|
|
Performing On-Wafer Testing with NI LabVIEW, NI TestStand, and PXI
Developing a reliable on-wafer test system for microelectromechanical system (MEMS) devices used for cardiac resynchronization therapy (CRT).
|
|
Effizientes Datenmanagement bei statistischen Tests – DIAdem TDM- Datenformat und DataFinder sorgen für Ordnung in der Versuchsverwaltung
Entwicklung eines effizienten Suchmechanismus im Datenmanagemensts bei statischen Tests am Beispiel der Qualitätsüberwachung unter Verwendung von DIAdem.
|
|
Automated Resistance Mapping of LGA Chip Module Contact Grid
Verifying uniform force distribution and quality of electrical connectivity on a pressurized land grid array (LGA) interposer and automating a time-consuming and physically prohibitive process involving substantial measurement, data recording, and data presentation.
|
|
Real-Time Quality Determination of Advanced High-Strength Steel Resistance Spot Weld
Determining the quality of resistance spot welds (RSWs) made from advanced high-strength steels (AHSS) for automotive applications using the nondestructive evaluation (NDE) method.
|
|
Caliper Brake Test System with an FPGA-based Servo Control System Using NI LabVIEW
Building a closed-loop servo controller to control pressure at a millibar tolerance limit and at a specified linear ramp rate.
|
|
Bridging NI TestStand and Legacy Test Systems
Porting a legacy test system to NI TestStand software to test more than 100 sequences by converting 10,000 home-grown steps and 500,000 lines of code (LOC) to create a fully qualified system within a few months.
|
|
Web-Based Test System with Flexible Data Storage, Mining, and Reporting
Designing a general-purpose radio frequency component measurement automation system that offers flexible and reliable test data storage and provides advanced data mining and reporting across the organization.
|
