|
VIiSA - Ein virtuelles Instrument zur interaktiven Signalanalyse
Konzeptionierung eines autoadaptiven Instruments mit speziell ausgelegten Eigenschaften für Anwendungen in der Maschinendiagnose: Frequenzanalyse, Cepstrum, Hüllkurvenanalyse, Hilberttransformation.
|
|
Entwicklung einer Programmbibliothek zur Analyse von Tierlauten
Entwicklung eines automatischen Lauterkennungssystem mithilfe der Decodierung von Tiervokalisationen durch Korrelation mit Verhalten und Physiologie. Dabei soll die Interpretation der Lautgebung von Tieren Informationen über deren emotionalen Zustand und damit über deren Befindlichkeit auf
|
|
Comfort acustico : come la tecnologia permette l’esecuzione “efficiente” di misure acustiche speciali
L’analisi della rumorosità di componenti interni al veicolo, quali ad esempio parti di cruscotto o arrotolatori di cinture di sicurezza, richiede processi di misura ed elaborazione dei segnali a volte complessi e parallelamente di personale specializzato, che non deve perdere tempo con operazioni
|
|
Testing Wind Turbines for Noise Emissions with NI LabVIEW
Providing a standardized test system to measure the noise impact of wind turbines to comply with the International Electrotechnical Commission (IEC) and other standards.
|
|
Developing the G.R.A.S. Microphone Calibration System Using NI LabVIEW and National Instruments Hardware
Developing a fully automated, traceable microphone calibration system that is reliable enough to be used by in-house production and external calibration labs.
|
|
Plataforma Para Test De Vibración VIT-1
Construir un sistema automatizado de test para comprobar el funcionamiento de distintos DUTs bajo aceleraciones programables. El sistema ha de ser capaz de adaptarse a distintas especificaciones de aceleración y testear más de un aparato del mismo tipo a la vez. La parte de la máquina de vibración
|
|
Banc de test de choc pour tubes hyperfréquences chez Thales
Acquérir et analyser des signaux en provenance d’un banc de test destiné à simuler des chocs pyrotechniques.
|
|
燃料タンク内で発生する損傷のリアルタイム位置標定システム
本研究では、CFRP製燃料タンクへの飛来物の衝突や損傷の発生を監視し、検知した場合にはその場所を正確かつリアルタイムに標定できるシステムを開発することを目的とする。
|
|
Monitoring Electromechanical Shovels for Open-Pit Mining
Developing a highly specialized continuous monitoring system for electromechanical mining shovels to enable a predictive maintenance strategy for these critical machines.
|
|
Measurement System for Aircraft Noise
Measure aircraft noise at 12 microphones, distributed at both sides of a runway in a line with an approximate length of 1500 m. The microphones have to be synchronized in time, also with the on-board measurement system. A centralized control is required, but the runway may not be crossed with
|
