|
Automating UL European Laboratories with LabVIEW to Improve Efficiency
Creating a system of custom virtual instruments interconnected using Ethernet and accessible through the Web as an alternative and improvement to traditional tools currently available on the market. This was a challenge for UL within the scope of tests for the assessment of electrical safety for
|
|
Automated Automotive Body Inspection System for Poka-Yoke Production Lines Using NI IMAQ Vision
Developing a machine vision inspection system for inspecting finished automotive bodies (“white bodies” or “bodies in white”) prepared for painting at the end of the frame assembly line in the welding shop.
|
|
Using NI LabVIEW and CAN to Control an Underwater Remotely Operated Vehicle
Designing, developing, and building hardware and software to control a remotely operated vehicle (ROV) in real time and relay diagnostic information regarding ROV health back to the ROV pilot in a simple and intuitive manner.
|
|
Developing a Strain Measurement Solution Using NI LabVIEW Software and Data Acquisition Hardware
Developing a high-speed strain gage measurement system for testing computer printed circuit boards (PCBs), motherboards, and mobile phones.
|
|
Automated Antenna Testing Using NI LabVIEW Software and PXI Hardware
Replacing existing manual antenna test systems with an automated solution that results in better equipment throughput and more test flexibility.
|
|
A modular test system for the characterization of smart power switches
The development of an automated test system for the characterization of smart power switches. As the system is intended to become a basic platform for various measurement tasks, focusing on flexibility, modularity and extensibility of both hardware and software was an important issue
|
|
High-Channel-Count Data Acquisition System for Gas Turbine Engines
Developing a 1024 channel count data acquisition (DAQ) system to monitor engine behavior during the development phase.
|
|
KOR Electronics Develops a Low-Cost Electronic Warfare Simulator for the Military Services Using the NI PXI Platform
Designing and deploying an electronic warfare simulator that has a modular, flexible, and expandable architecture using the latest commercial off-the-shelf (COTS) technologies.
|
|
Protecting the Neighborhood from Noise and Vibration with SAVE
Monitoring the noise and vibrations generated on construction sites to comply with neighborhood noise regulations.
|
|
Studying Human Locomotion of Amputees Using Prostheses with NI Multisim
Creating a portable, wearable device to conduct gait analysis and study human locomotion of amputees using prostheses.
|
