|
Automated Characterization of Analog-to-Digital Converters Using PXI, LabVIEW, and DIAdem
Replacing existing benchtop equipment with a fully automatic measurement system to accurately characterize analog-to-digital converters (ADCs) to improve quality, reduce costs, and shorten test development time.
|
|
Testing Clutch Drive Plate Production with NI LabVIEW and NI Hardware
Creating an end-of-line test system to provide a traceable quality standard of clutch drive plates for supplying original equipment (OE) parts to the automotive industry.
|
|
Caliper Brake Test System with an FPGA-based Servo Control System Using NI LabVIEW
Building a closed-loop servo controller to control pressure at a millibar tolerance limit and at a specified linear ramp rate.
|
|
Web-Based Test System with Flexible Data Storage, Mining, and Reporting
Designing a general-purpose radio frequency component measurement automation system that offers flexible and reliable test data storage and provides advanced data mining and reporting across the organization.
|
|
Individual Evaluation System with DIAdem on a Shock-Absorber Test Rig
Create a complementary evaluation system for a new shock-absorber test stand at the AUDI company, for enhanced test data evaluation and for integrating the data management procedures into the ASAM-ODS-oriented AUDI environment.
|
|
Evaluating Climate Data the Easy Way: The DIAdem DataFinder Moves You from Separate Solutions to an Overall Evaluation System
The environmental monitoring project run by the Bavarian Department of Forestry (LWF) produces very large amounts of data, in different formats, and acquired by hardware and software from different companies. This prevents effective data control and quality management.
|
|
Testing Pedestrian Head Impact on Automotive Closure Parts
Comparison between the pedestrian safety levels of aluminum and steel, used as hood materials. The draft that was submitted to the European Commission early in 2005, involving special structural requirements relating to the deformation properties for the front of vehicles when they impact on
|
|
Automating Data Analysis in a High Voltage Test Facility by Integrating DIAdem in Saturn Measurement Technology
Constantly increasing standards demand on new software and hardware concepts for data acquisition, data analysis, and report generation. An algorithm for lightning impulse voltage analysis in the area of high-voltage measurement technology will be used to demonstrate innovative concepts based on
|
|
Evaluation of Wind-Tunnel Test Data with NI DIAdem at Airbus
The development of a Europe-wide standardized solution for the evaluation of wind-tunnel test data to be used, for example, to research the impact of specific thermal and aerodynamic parameters on passenger planes.
|
|
Using DIAdem to Register Earthquakes at the Geological Survey of Northrhine-Westphalia
The Geological Survey of Northrhine-Westphalia operates a seismic network of 13 stations in the Lower Rhine and neighboring areas. The registered data is sent per ISDN and DSL to the main office in Krefeld, where the data is examined and evaluated. For these large amounts of data an efficient
|
