|
Controlling the World’s Largest Fuel-Cell Hybrid Locomotive with NI LabVIEW and CompactRIO
We removed the diesel fuel tank and generator set in preparation for retrofitting the fuel-cell power plant and hydrogen storage. Photo courtesy of Railpower Hybrid Technologies.
|
|
Caliper Brake Test System with an FPGA-based Servo Control System Using NI LabVIEW
Building a closed-loop servo controller to control pressure at a millibar tolerance limit and at a specified linear ramp rate.
|
|
Interactive PCB- or Chip-Scale Thermal Visualization Tool
...Developing an interactive graphical simulation in a printed circuit board (PCB) or...or complex, state-of-the-art simulation tools generally require deeply committed...nodes. In the case of a die-level simulation, where multiple heat sources represent...
|
|
Nucor Refines Steel Recycling Using NI LabVIEW and National Instruments Hardware
Developing an automation system for a steel recycling facility that reduces the amount of energy consumed to comply with statewide energy regulations while improving the safety and efficiency of the plant.
|
|
Georgia Institute of Technology Simplifies Teaching Circuit Design with NI ELVIS, NI LabVIEW, and NI Multisim
...circuit design concepts. " Circuit simulation and measurement are fundamental to an... Simplifying Circuit Design and Simulation for Students with the NI Education Platform...Integrates NI LabVIEW Control Design and Simulation Tools with Hands-On Controls Experiments...
|
|
Training Surgeons to Perform Robot-Assisted Laparoscopy with NI LabVIEW
Training doctors to perform robot-assisted laparoscopic surgery using the da Vinci Surgical System (dVSS).
|
|
CERN Uses NI LabVIEW Software and PXI Hardware to Control World’s Largest Particle Accelerator
Measuring and controlling, in real time, the position of bulk components to absorb energetic particles out of the nominal beam core with high reliability and accuracy at the world’s most powerful particle accelerator, the Large Hadron Collider (LHC).
|
|
Selex-Galileo Develops Field-Orientated Control of a Three-Phase Brushless Permanent Magnet Motor
...reconfigurable control and acquisition platform. Hardware description language (HDL) generation, logic synthesis, HDL simulation, and place and route activities are fully automated into the compilation process. The VHDL is loaded to the Virtex XC2V1000...
|
|
Testing Electronic Control Units with NI PXI and TestStand
Providing an innovative and cost-effective functional engine control unit (ECU) and electronic control module (ECM) test solution for service and high-volume manufacturing.
|
|
Creating Flexible Engine Simulators with the LabVIEW FPGA Module
...I/O boards to provide real-time simulation with precise, flexible timing and synchronization...building our own hardware." HIL Simulation Demands As the worldwide leader in...needed to build our own system. For the simulation, we selected the LabVIEW Real-Time...
|
